Sharp PC-1211, battery question
|
04-27-2022, 10:56 AM
Post: #6
|
|||
|
|||
RE: Sharp PC-1211, battery question
You can use LR44 batteries in the version of the PC1211 that takes 3 1.5V batteries. This seems to be a version that was sold by Sharp later on. They aren't very common but I do have one.
Alternatively you can maybe rewire the power circuit with a diode to drop the extra voltage. I did this on one of my PC1211s and it seems fine, although I am a bit dubious about the centre tap that the circuit uses. I need to revisit this mod and see if I can improve it. I wrote it up here: https://trochilidae.blogspot.com/2016/11...c1211.html Andrew |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Sharp PC-1211, battery question - Dan C - 04-26-2022, 05:53 PM
RE: Sharp PC-1211, battery question - Jeff_Birt - 04-26-2022, 06:02 PM
RE: Sharp PC-1211, battery question - Dan C - 04-26-2022, 06:10 PM
RE: Sharp PC-1211, battery question - Dave Britten - 04-26-2022, 07:17 PM
RE: Sharp PC-1211, battery question - Sukiari - 04-27-2022, 02:09 PM
RE: Sharp PC-1211, battery question - Dave Britten - 04-27-2022, 03:21 PM
RE: Sharp PC-1211, battery question - Maximilian Hohmann - 04-26-2022, 07:19 PM
RE: Sharp PC-1211, battery question - blackjetrock - 04-27-2022 10:56 AM
RE: Sharp PC-1211, battery question - Dave Britten - 04-27-2022, 11:50 AM
RE: Sharp PC-1211, battery question - blackjetrock - 04-27-2022, 08:35 PM
RE: Sharp PC-1211, battery question - Nigel (UK) - 04-30-2023, 03:49 PM
RE: Sharp PC-1211, battery question - Gianfilippo980 - 10-18-2023, 10:07 PM
RE: Sharp PC-1211, battery question - laug - 05-11-2024, 10:13 PM
|
User(s) browsing this thread: 1 Guest(s)