HP Forums / Not HP Calculators / Not remotely HP Calculators v / TI-58C not powering up

Post Reply 
TI-58C not powering up
04-07-2022, 01:55 PM (This post was last modified: 04-07-2022 01:55 PM by Massimo Gnerucci.)
Post: #3
Massimo Gnerucci Offline
Senior Member
 		Posts: 2,660
Joined: Dec 2013
RE: TI-58C not powering up
(04-07-2022 11:45 AM)Maximilian Hohmann Wrote:  Set the voltage to 3.6V DC and mind the polarity. Which is not difficult because contrary to HP - and I say this to our members here who enjoy bashing Ti :-) - Texas Instruments undertook the effort to put polarity labels next to the battery connectors!

Like this, you mean? ;-)

[Image: bc19.jpg]

Note the markings on the inner posts.
Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
TI-58C not powering up - Andrew Varney - 04-07-2022, 09:53 AM
RE: TI-58C not powering up - Massimo Gnerucci - 04-07-2022 01:55 PM
RE: TI-58C not powering up - Steve Simpkin - 05-19-2022, 01:36 AM
RE: TI-58C not powering up - Dave Britten - 04-07-2022, 02:58 PM
RE: TI-58C not powering up - Dave Britten - 04-07-2022, 03:45 PM
RE: TI-58C not powering up - Dave Britten - 04-07-2022, 04:44 PM
RE: TI-58C not powering up - DrewNicholson - 05-16-2022, 06:02 PM
RE: TI-58C not powering up - Xorand - 05-18-2022, 01:31 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication