HP Forums / Not HP Calculators / Not quite HP Calculators - but related v / HP-30b - dead key - repair

Post Reply 
HP-30b - dead key - repair
06-20-2014, 06:03 PM (This post was last modified: 06-20-2014 06:05 PM by jebem.)
Post: #17
jebem Offline
Senior Member
 		Posts: 1,355
Joined: Feb 2014
RE: HP-30b - dead key - repair
(06-20-2014 04:53 PM)pito Wrote:  Encouraged we removed the heads of the plastic rivets with 4mm dia drill bit (wood-boring brad point drill bit). The Enter pin was bent, after repair it has been reenforced with epoxy. See the pictures.
The keyboard has been clearly designed for planned obsolescence..

Excellent team work. Thank you all for for sharing.
Pito, did you use epoxy to fix the plastic rivets? Did it wok fine?
Jose Mesquita
RadioMuseum.org member
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP-30b - dead key - repair - pito - 06-17-2014, 07:21 PM
RE: HP-30b - dead key - repair - pito - 06-17-2014, 07:41 PM
RE: HP-30b - dead key - repair - walter b - 06-17-2014, 08:05 PM
RE: HP-30b - dead key - repair - jebem - 06-18-2014, 05:30 AM
RE: HP-30b - dead key - repair - pito - 06-18-2014, 10:42 AM
RE: HP-30b - dead key - repair - Jeff O. - 06-18-2014, 12:49 PM
RE: HP-30b - dead key - repair - pito - 06-18-2014, 06:18 PM
RE: HP-30b - dead key - repair - Jeff O. - 06-19-2014, 02:42 PM
RE: HP-30b - dead key - repair - pito - 06-19-2014, 04:27 PM
RE: HP-30b - dead key - repair - Jeff O. - 06-19-2014, 02:35 PM
RE: HP-30b - dead key - repair - pito - 06-19-2014, 04:39 PM
RE: HP-30b - dead key - repair - pito - 06-20-2014, 04:53 PM
RE: HP-30b - dead key - repair - jebem - 06-20-2014 06:03 PM
RE: HP-30b - dead key - repair - pito - 06-20-2014, 06:33 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication