Post Reply 
Magnetic Card Questions
12-06-2020, 01:39 AM
Post: #7
RE: Magnetic Card Questions
Just to be clear, you can’t read a card written by a -65 on a -67/-97 or vice versa. But you can overwrite the card on either machine, and then it’s now compatible with the overwriting machine. In other other words, a blank card is just that—blank. It has no inherent formatting for a specific machine.

I thought I’ve removed marker and/or cleaned cards with isopropanol.-kby
(12-05-2020 12:57 PM)AndiGer Wrote:  Basically you can use the same type of magnetic cards in both machines.
But: Written cards for HP-65 and HP-67/-97 are not interchangable. So - a card written in an HP-65 can't be read by a HP-67/-97 and vice versa. The only compatibility is HP-67/-97 cards in the HP-41 card reader (but there some limits) - and the card reader must be attached when running HP-67/-97 programs.
Respecting the magnetic cards HP-67 and HP-97 are fully compatible.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Magnetic Card Questions - Kostas Kritsilas - 12-05-2020, 09:55 AM
RE: Magnetic Card Questions - Thomas Okken - 12-05-2020, 10:46 AM
RE: Magnetic Card Questions - AndiGer - 12-05-2020, 12:57 PM
RE: Magnetic Card Questions - [kby] - 12-06-2020 01:39 AM
RE: Magnetic Card Questions - Erik-M - 12-05-2020, 01:16 PM
RE: Magnetic Card Questions - Dave Britten - 12-05-2020, 02:20 PM
RE: Magnetic Card Questions - Sylvain Cote - 12-05-2020, 03:03 PM
RE: Magnetic Card Questions - Sukiari - 12-06-2020, 01:53 AM
RE: Magnetic Card Questions - Sylvain Cote - 12-06-2020, 02:58 AM
RE: Magnetic Card Questions - Dave Britten - 12-06-2020, 03:00 AM
RE: Magnetic Card Questions - Sylvain Cote - 12-06-2020, 03:20 AM
RE: Magnetic Card Questions - Sukiari - 12-07-2020, 10:38 PM
RE: Magnetic Card Questions - Sukiari - 12-08-2020, 05:28 AM
RE: Magnetic Card Questions - [kby] - 12-06-2020, 07:48 AM
RE: Magnetic Card Questions - Sylvain Cote - 12-06-2020, 04:36 PM
RE: Magnetic Card Questions - [kby] - 12-07-2020, 12:03 AM



User(s) browsing this thread: 1 Guest(s)