HP-65 1602A01827 restore and an idea for the back label

[albertofenini]

Hi everyone,
hope everyone is doing well and in good health !
Since we are in a regional lockdown we took out our tools and got back to work.
This was a simple restoration, but we have worked out an idea that could be of interest
for the applying the back table as smooth as possible.
Using an old plastic mat we have cut a piece of it exactly the size of the back label.
It must be of the exact size, it will be used to apply the necessary pressure once the
glue has been sprayed and it will be used to keep under pressure the label while the glue dries out.
Attached is a link with some picture, we will post the final result tomorrow since the glue must dry for 24 hours (it's a 3M model)
As a final note, we had restored the card reader wheel with silicone tubing but it didn't work so we reversed to the o'ring solution
HP-65 1602A01827 restore and an idea for the back label
[Edit] Please note that since the Apple shared albums are posted with the most recent picture first,
the picture with the back label attached was taken before the restoration and before the label was removed