HP Forums / HP Calculators (and very old HP Computers) / HP Prime v / Power up time

Post Reply 
Power up time
03-25-2020, 10:15 AM
Post: #11
toml_12953 Offline
Senior Member
 		Posts: 2,083
Joined: Dec 2013
RE: Power up time
(03-25-2020 06:40 AM)cyrille de brébisson Wrote:  But basically, the CPU will boot the Besta OS, which is around 2MB (in comparison, the Prime G2 OS is around 200KB!)...

Since the Besta OS is much smaller, this allows it to load fast and display the animation at startup time to hide the application load/boot time.

Cyrille

You say BestaOS is around 2MB and G2 OS is around 200KB but you also say
the Besta OS is much smaller

How is 2MB smaller than 200KB?
Tom L
Cui bono?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Power up time - Tugdual - 03-22-2020, 09:09 AM
RE: Power up time - Joe Horn - 03-22-2020, 11:52 AM
RE: Power up time - Tugdual - 03-22-2020, 04:26 PM
RE: Power up time - cdmackay - 03-23-2020, 12:08 AM
RE: Power up time - Joe Horn - 03-23-2020, 02:09 AM
RE: Power up time - Tugdual - 03-23-2020, 04:13 PM
RE: Power up time - cdmackay - 03-24-2020, 02:28 AM
RE: Power up time - cyrille de brébisson - 03-24-2020, 07:04 AM
RE: Power up time - CyberAngel - 03-24-2020, 07:27 AM
RE: Power up time - cyrille de brébisson - 03-25-2020, 06:40 AM
RE: Power up time - toml_12953 - 03-25-2020 10:15 AM
RE: Power up time - cdmackay - 03-26-2020, 12:31 AM
RE: Power up time - cyrille de brébisson - 03-26-2020, 06:28 AM
RE: Power up time - Tugdual - 03-26-2020, 10:48 AM
RE: Power up time - cyrille de brébisson - 03-27-2020, 06:41 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication