New G2 Firmware 20200116 - Problems - FIXED w/ 20200121

[smp]

(01-17-2020 06:44 PM)Jet1945 Wrote:  

(01-17-2020 06:05 PM)smp Wrote:  My HP Connectivity Kit is indicating no updates available.
Is this another time that we have to do everything manually again?

smp

I downloaded the firmware and put the files is Connectivity folder under Firmware in the sub-folder marked PrimeG2.

The connectivity kit looks there for the updates.

Note: Ensure that you also DL the companion Connectivity Kit for the Firmware update (there is also a Virtual Calculator update too).

I apologize up front for my continued dumb-ness in this situation.

I finally jumped through all the Mac OS hoops to get the latest HP Connectivity Kit installed. I am now successfully running with HPCK 2.1.14425 (2020 1 16).

If I use the HPCK to check for updates, it reports that no updates are available.

Based on the advice quoted above, I returned to the HPCalc web site and looked here:
https://www.hpcalc.org/prime/pc/

I see there an entry for HP Prime Firmware 2.1.14425 (2020-01-16) right under the entry for the Mac OS HP Connectivity Kit. However, the contents of that .ZIP file are:

Code:


  Length      Date    Time    Name 
---------  ---------- -----   ---- 
 33554432  2020-01-16 07:20   PRIME_APP.DAT 
      708  2020-01-16 07:20   Prime_FW.md5 
  4194304  2018-10-04 13:35   PRIME_MASTER.DAT 
  1048576  2018-10-04 13:35   PRIME_OS.ROM 
    79276  2020-01-16 12:19   release_info.txt 
      538  2019-12-17 06:00   release_info_CHS.html 
      727  2019-12-17 06:00   release_info_DEU.html 
      597  2019-12-17 06:00   release_info_EN.html 
      688  2019-12-17 06:00   release_info_ESP.html 
      780  2019-12-17 06:00   release_info_FRA.html 
      739  2019-12-17 06:00   release_info_JPN.html 
      626  2019-12-17 06:00   release_info_NLD.html 
      669  2019-12-17 06:00   release_info_PTB.html 
        3  2020-01-16 07:20   version_20200116 
---------                     ------- 
 38882663                     14 files

These files appear to be the files for the Prime G1 calculator. There is no HPPrime_OS.img file, which I believe would be the one for the Prime G2 calculator.

Am I missing something? Is is that the update for the Prime G2 has not yet been posted, or has been removed? Any advice or comments would be very welcome!

smp