Post Reply 
If I were to buy an LED model...
11-09-2019, 12:19 PM (This post was last modified: 11-09-2019 12:20 PM by Massimo Gnerucci.)
Post: #6
RE: If I were to buy an LED model...
(11-09-2019 11:59 AM)Maximilian Hohmann Wrote:  Hello!

(11-09-2019 11:42 AM)Massimo Gnerucci Wrote:  Or, maybe, a 34C.
No card reader problems, no unbearable labels under the keys.

If you can find one at all... And eben if, it will suffer from cheap cracked plastic and battery leakage. Personally I vastly prefer the labels on the wrong side of the keys over that!

One could of cause also look for an HP-65. For some reason they are easier to find (and also cheaper) than an HP-34 or 67. And it is a real piece of history, the first prgrammable scientific pocket calculator. Built to last. Replace the O-rings in the card reader, get a replacement battery pack and you are good to go for another 50 years.

Regards
Max

You are right, of course, but my point was that the 67 was not the latest LED calculator ever designed. And the 34C is quite powerful, too.

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: If I were to buy an LED model... - Massimo Gnerucci - 11-09-2019 12:19 PM



User(s) browsing this thread: 1 Guest(s)