Post Reply 
CMT71-64E HP-71b eprom module questions
04-28-2021, 09:41 AM
Post: #18
RE: CMT71-64E HP-71b eprom module questions
(04-28-2021 08:02 AM)KimH Wrote:  
(04-28-2021 07:02 AM)dmh Wrote:  I think I can see 64k scroll past rapidly but can't seem to scroll back or only show port 1. I'm pretty new to the 71b so if you can advise how to scroll back or only show one port (I unsuccessfully tried various things).


The easiest way is to set DELAY 2 (all displayed messages are "paused" for 2 seconds) or whatever you fancy.

TEST32KE LEX is what CMT had on the module from Factory (64k modules would have TEST64KE), as are the two with EPRM*** and the CLONE program.

The command in TEST32KE is ROMTST which will tell you if the ROM is OK or not OK.

If your Google CMT71-P01 you will get to know a bit more about the EPROM Burner and the programs just mentioned

Add: The reason I know a bit about this - without owning a ROM-Burner, is that I have spent some time understanding the EPROM and Burner. I have an open agreement to meet an owner of a working CMT71-P01 in Switzerland as soon as the C-19 pandemic tapers off...

So how many burners were made and are still in service I wonder?

Ok, so SHOWPORT shows the module is 64k but ROMTST says 'BAD ROM'. I've tried a few commands and they appear to work.

Could this be because it's the wrong test (the 32k test is loaded on a 64k module)?
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: CMT71-64E HP-71b eprom module questions - dmh - 04-28-2021 09:41 AM

User(s) browsing this thread: 1 Guest(s)