HP Forums / HP Calculators (and very old HP Computers) / General Forum v / [HP-71B], FRAM71: putting an end to feature creep

Post Reply 
[HP-71B], FRAM71: putting an end to feature creep
05-06-2014, 08:38 PM (This post was last modified: 05-06-2014 08:40 PM by Paul Berger (Canada).)
Post: #4
Paul Berger (Canada) Offline
Senior Member
 		Posts: 546
Joined: Dec 2013
RE: [HP-71B], FRAM71: putting an end to feature creep
A USB connection to a PC might be useful, however I mostly use my 71Bs with an old PC that supports a HPIL adapter so I can use the PC for keyboard and display. I also have HPIL HP82169As for serial connections, and 82162As for printing. I also print to serial dot matrix printers using a 82169A, so I would probably not use IR printing.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [HP-71B], FRAM71: putting an end to feature creep - Paul Berger (Canada) - 05-06-2014 08:38 PM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication