My HP-41CV projects
|
01-08-2019, 02:18 PM
Post: #5
|
|||
|
|||
RE: My HP-41CV projects
Hello!
Today i printed a new battery holder for my 82143A printer. I soldered 4 Sub-C NiMh cells together and made new battery contacts out of brass sheet. For safety i added 3 layers electrical tape between the cells and the brass contacts. Charging is done with a NiMh charger outside of the printer, because the internal charging circuit is not compatible with the NiMh battery. Printing my notes and program listings works perfect! Pictures: http://www.sp-net.at/nextcloud/apps/gall...wGCQ7fNwFT Later I tried the program "TE" from the book "Extended Functions Made Easy" and noticed a conflict between the CCD Module and Zenrom if loaded together in one clonix module. With both Modules loaded, the Alpha Input is not working correctly. I found a Note inside the CCD folder from the HP41-DVD: Quote:Incompatibilities: I also found a little program that does this job: LBL "TLC" 13.4 PEEKB 128 XOR POKEB CLST END Now Alpha input works! Stefan |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
My HP-41CV projects - _dev-null - 01-07-2019, 07:24 PM
RE: My HP-41CV projects - JurgenRo - 01-07-2019, 09:04 PM
RE: My HP-41CV projects - Sylvain Cote - 01-08-2019, 01:05 AM
RE: My HP-41CV projects - _dev-null - 01-08-2019, 02:24 PM
RE: My HP-41CV projects - mfleming - 01-08-2019, 02:36 AM
RE: My HP-41CV projects - _dev-null - 01-08-2019 02:18 PM
|
User(s) browsing this thread: 1 Guest(s)