Successfully transfering files between 48SX and 50G
|
11-30-2018, 07:30 PM
Post: #1
|
|||
|
|||
Successfully transfering files between 48SX and 50G
Hi all.
This week I successfully transfered text strings between a 48SX and a 50G. Both calculators was connected to a PC through a RS232 (48SX) and USB (50G). The PC was set to bridge both connections. It actually worked. A text string was send with XMIT and recieved on the other calculator. It's a fully functional bidirectional connection. My plan is to use a smaller computer like a Raspberry Pi or even an Arduino if the right library exist for it. It's been a while since I did some serious programming on those calculators, so I'm a bit rusty. I want to write some sort of a client to transfer whole directories over the serial link. That way I can more easily live without Windows and just rely on my calculators. Please comment below on your thoughts and ideas. Thanks in advance. Bernhard/OZ9WTN |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Successfully transfering files between 48SX and 50G - berserkerbernhard - 11-30-2018 07:30 PM
RE: Successfully transfering files between 48SX and 50G - BruceH - 11-30-2018, 08:57 PM
RE: Successfully transfering files between 48SX and 50G - SammysHP - 11-30-2018, 10:04 PM
RE: Successfully transfering files between 48SX and 50G - Steve Simpkin - 11-30-2018, 10:55 PM
RE: Successfully transfering files between 48SX and 50G - John Keith - 11-30-2018, 11:11 PM
RE: Successfully transfering files between 48SX and 50G - Steve Simpkin - 11-30-2018, 11:45 PM
|
User(s) browsing this thread: 1 Guest(s)