HP-IL and EMU71

[Sylvain Cote]

Hello Henk,

Here's another small how-to.

Setup between Emu71 and ILPer (TCP/IP mode, no PIL-Box)

• start ILPer
  
  • in Mass Storage section, enter the following values
    
    • Drive HP9114B: path with filename of the LIF file (ex.: C:\Temp\HP9114B.DAT )
    • Drive HDRIVE1: path with filename of the LIF file (ex.: C:\Temp\HDRIVE1.DAT )
      
  • in DosLink section, enter the following values
    
    • Out: path with filename of the doslkink output file (ex.: C:\Temp\my-out.dat )
    • In: path with filename of the doslkink input file (ex.: C:\Temp\my-in.dat )
      
  • in PIL-Box Link section, enter the following values
    
    • In drop-box, select TCP/IP option
      
  • at the bottom-right of the ILPer dialog
    
    • uncheck Scope check box
      
  • at the top-left of the ILPer dialog
    
    • click on the small icon to bring up a menu
    • select TCP/IP Setup...
      
      • Out TCP/IP address: localhost
      • Out Port: 60000
      • In Port: 60001
      • Press OK button
        
  • Press Start button
    
• start Emu71
  
  • use the same configuration as the previous how-to
  • reinitialise the HP-IL loop and reconfigure the devices in the loop
    
    Code:
    

    RESET HPIL
RESTORE IO
  • Device list
    
    Code:
    

    Address :  DEVAID  : DEVID$
   1    : 2E /  46 : "DISPLAY"
   2    : 10 /  16 : "HP9114B"
   3    : 10 /  16 : "HDRIVE1"
   4    : 4E /  78 : "DOSLINK"
  • Format the HP-9114B virtual floppy ( C:\Temp\HP9114B.DAT )
    
    Code:
    

    INITALIZE TAPE1:MASSMEM(1)
  • Create a new BASIC file
    
    Code:
    

    EDIT
  • Enter your program in Emu71 memory
    
    Code:
    

    10 ! DCV HP 71/3468A
20 REAL V
30 CLEAR
40 D=DEVADDR("HP3468A")
60 ENTER D ; V
70 DISP V
80 END
  • Rename your BASIC file
    
    Code:
    

    RENAME TO DCV71
CAT                       // shows: "DCV71      BASIC    77 MM/DD/YY HH:MM"
  • Copy your program from Emu71 memory to the floppy drive
    
    Code:
    

    COPY DCV71 TO :MASSMEM(1)
  • List tape content to printer
    
    Code:
    

    DISPLAY IS :1
CAT :MASSMEM(1)
    Use up arrow key and down arrow key to navigate the file catalog, ON key leave the catalog
    
    Code:
    

       NAME    S TYPE   LEN    DATE    TIME 
DCV71        BASIC    77 03/05/24 00:16
  • unmap display to printer
    
    Code:
    

    DISPLAY IS *