low cost 32S on ESP32-S3

[Pierre]

(12-29-2023 05:04 PM)arhtur Wrote:  Another option for burning the firmware is to use the M5Stack Easyloader at:
https://docs.m5stack.com/en/quick_start/...der_packer
You select the 3 .bin files and tell the program what address to put them, and it will produce a .exe file. Windows will give a warning that it's from an unrecognized source, so use at your own discretion.
I've attached a screenshot for the ESP32S3 download tool, in case that helps.
The M5Stack Cardputer actually has 2 batteries - one for Cardputer and one for the M5Stamp. The diagram on the back indicates that to charge the M5Stamp, the power switch must be on. It looks like it uses the 5V in for charging the Cardputer battery, so I would recommend using a USB-A to USB-C cable (charging from a 5V USB-A source), although a USB-C to USB-C cable may work.

Thank you for all those informations.
1) I found the correct drivers for Win7.
2) I found out why nothing was working: I'm a stupid donkey! Too eager to have the 10LC and the 32LC at the same time, I mixed up the downloads a bit...
So my first test of the 10LC works.
AWESOME !!!
I'm not going to bed early... (8 p.m. in France)
I will post photos tomorrow.
Again thanks to you.