low cost 32S on ESP32-S3
|
12-29-2023, 05:04 PM
Post: #12
|
|||
|
|||
RE: low cost 32S on ESP32-S3
Another option for burning the firmware is to use the M5Stack Easyloader at:
https://docs.m5stack.com/en/quick_start/...der_packer You select the 3 .bin files and tell the program what address to put them, and it will produce a .exe file. Windows will give a warning that it's from an unrecognized source, so use at your own discretion. I've attached a screenshot for the ESP32S3 download tool, in case that helps. The M5Stack Cardputer actually has 2 batteries - one for Cardputer and one for the M5Stamp. The diagram on the back indicates that to charge the M5Stamp, the power switch must be on. It looks like it uses the 5V in for charging the Cardputer battery, so I would recommend using a USB-A to USB-C cable (charging from a 5V USB-A source), although a USB-C to USB-C cable may work. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
low cost 32S on ESP32-S3 - arhtur - 12-25-2023, 06:15 PM
RE: low cost 32S on ESP32-S3 - Pierre - 12-26-2023, 06:53 PM
RE: low cost 32S on ESP32-S3 - arhtur - 12-26-2023, 08:38 PM
RE: low cost 32S on ESP32-S3 - Pierre - 12-26-2023, 10:05 PM
RE: low cost 32S on ESP32-S3 - arhtur - 12-27-2023, 02:50 AM
RE: low cost 32S on ESP32-S3 - Pierre - 12-27-2023, 09:24 AM
RE: low cost 32S on ESP32-S3 - Pierre - 12-27-2023, 10:08 AM
RE: low cost 32S on ESP32-S3 - arhtur - 12-28-2023, 04:18 PM
RE: low cost 32S on ESP32-S3 - Pierre - 12-28-2023, 05:32 PM
RE: low cost 32S on ESP32-S3 - Pierre - 12-29-2023, 07:59 AM
RE: low cost 32S on ESP32-S3 - Pierre - 12-29-2023, 02:47 PM
RE: low cost 32S on ESP32-S3 - arhtur - 12-29-2023 05:04 PM
RE: low cost 32S on ESP32-S3 - Pierre - 12-29-2023, 06:59 PM
RE: low cost 32S on ESP32-S3 - Pierre - 12-30-2023, 04:49 PM
|
User(s) browsing this thread: 1 Guest(s)