Post Reply 
67 is flakey
10-14-2023, 08:31 PM
Post: #17
RE: 67 is flakey
Mystery solved! ROM3 (1818-0231) bad. Interestingly, I powered up the unit w/o ROM3 installed and it behaved EXACTLY the same as before. (see previous post about failure mode and observations)

So I still have one "bad" logic board (needs ROM3) and one good one.

But now I can sleep.

Mark
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
67 is flakey - mbielman - 10-09-2023, 04:26 PM
RE: 67 is flakey - mbielman - 10-11-2023, 01:48 AM
RE: 67 is flakey - teenix - 10-11-2023, 03:49 AM
RE: 67 is flakey - John Garza (3665) - 10-11-2023, 06:49 AM
RE: 67 is flakey - mbielman - 10-11-2023, 02:31 PM
RE: 67 is flakey - John Garza (3665) - 10-11-2023, 04:01 PM
RE: 67 is flakey - mbielman - 10-11-2023, 04:08 PM
RE: 67 is flakey - John Garza (3665) - 10-11-2023, 10:39 PM
RE: 67 is flakey - mbielman - 10-11-2023, 04:14 PM
RE: 67 is flakey - teenix - 10-11-2023, 07:40 PM
RE: 67 is flakey - mbielman - 10-11-2023, 08:04 PM
RE: 67 is flakey - teenix - 10-11-2023, 08:18 PM
RE: 67 is flakey - mbielman - 10-11-2023, 11:10 PM
RE: 67 is flakey - mbielman - 10-13-2023, 01:49 AM
RE: 67 is flakey - teenix - 10-13-2023, 02:22 AM
RE: 67 is flakey - mbielman - 10-13-2023, 03:21 AM
RE: 67 is flakey - mbielman - 10-14-2023 08:31 PM
RE: 67 is flakey - teenix - 10-15-2023, 12:07 AM
RE: 67 is flakey - mbielman - 10-14-2023, 10:13 PM
RE: 67 is flakey - mbielman - 10-15-2023, 12:17 AM



User(s) browsing this thread: 1 Guest(s)