testing a 41cv before attempting lower post repair
|
07-24-2021, 07:28 AM
Post: #3
|
|||
|
|||
RE: testing a 41cv before attempting lower post repair
I ended up putting it together without any screws and applying pressure top and bottom and it fired up with the good old 'MEMORY LOST' and I was able to run a CATALOG 3 and do a few basic things (with limited spare fingers).
It needed a lot of pressure so I wonder whether the lower post repair and longer screws will be enough to maintain that pressure?!? The foam behind the battery and module connection looked ok so not sure what else I can do. The solderless Spice models made me wonder why someone hasn't come up with a similar clip solution to keep the CPU board connected to the keyboard. Pressure on the lower posts wouldn't be an issue then. Maybe there isn't enough room. Calculator Clique on YouTube |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
testing a 41cv before attempting lower post repair - dmh - 07-21-2021, 08:38 AM
RE: testing a 41cv before attempting lower post repair - mfleming - 07-21-2021, 02:30 PM
RE: testing a 41cv before attempting lower post repair - dmh - 07-24-2021 07:28 AM
RE: testing a 41cv before attempting lower post repair - BillBee - 07-26-2021, 10:19 AM
RE: testing a 41cv before attempting lower post repair - mfleming - 07-24-2021, 02:45 PM
RE: testing a 41cv before attempting lower post repair - cruff - 07-24-2021, 10:45 PM
RE: testing a 41cv before attempting lower post repair - dmh - 07-26-2021, 11:32 AM
RE: testing a 41cv before attempting lower post repair - cruff - 07-26-2021, 12:32 PM
|
User(s) browsing this thread: 1 Guest(s)