Post Reply 
Wanted: PIK chip for Topcat
04-01-2020, 08:03 PM
Post: #1
Wanted: PIK chip for Topcat
Hi all,

I have a HP91 with defective PIK chip (1820-1680). I'm looking for a spare part or a defective HP91/92/97 for parts.

Achim (Germany)
Find all posts by this user
Quote this message in a reply
04-01-2020, 09:28 PM
Post: #2
RE: Wanted: PIK chip for Topcat
(04-01-2020 08:03 PM)achim Wrote:  Hi all,

I have a HP91 with defective PIK chip (1820-1680). I'm looking for a spare part or a defective HP91/92/97 for parts.

Achim (Germany)

You will need a PIK chip from the HP-91. There are only 64 characters available for the PIK chip to print so it is not possible to cater for all calculator models with the one chip. They have a ROM which is programmed by the factory to have different sets of print characters for the different calculator models.

An example, the HP-97 has lowercase (a) whereas the HP-91 has (theta) at the same character ROM location.

They have different part numbers too.

cheers

Tony
Find all posts by this user
Quote this message in a reply
04-02-2020, 11:02 AM
Post: #3
RE: Wanted: PIK chip for Topcat
Hi Tony,

thanks for this clarification.
That's of course no good news, since the HP91 is quite rare with respect to a HP97.

All the best,
Achim
Find all posts by this user
Quote this message in a reply
04-02-2020, 08:32 PM
Post: #4
RE: Wanted: PIK chip for Topcat
(04-02-2020 11:02 AM)achim Wrote:  Hi Tony,

thanks for this clarification.
That's of course no good news, since the HP91 is quite rare with respect to a HP97.

All the best,
Achim

Achim,

I think I can help you out. The PIK in my second 97 was flaky so some time ago I bought the logic board for a 91 never thinking that the PIK would be different and indeed when I installed it basic printing seemed to work so I didn't think anything more of it until reading Tony's post above so if you want the PIK send me a PM, for that matter you can have the rest of the 91 board if you wish there is no ACT on it any more but has all the other components.

Paul.
Find all posts by this user
Quote this message in a reply
04-06-2020, 10:19 AM
Post: #5
RE: Wanted: PIK chip for Topcat
Paul,

thanks for your offer. I replied to you by mail.

Achim
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)