Post Reply 
Wanted: 49G+ w/ 3rd rev. keyboard
06-26-2014, 07:58 AM
Post: #1
Wanted: 49G+ w/ 3rd rev. keyboard
Since german ebay is of no use here and not every seller in the US likes to give the serial number, I ask here for a 49G+ with last revision keyboard. A manual and a case would be nice.
Find all posts by this user
Quote this message in a reply
06-27-2014, 08:12 PM
Post: #2
RE: Wanted: 49G+ w/ 3rd rev. keyboard
Hi, Thomas,
How do we know about the keyboard generation?

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
06-28-2014, 05:51 AM
Post: #3
RE: Wanted: 49G+ w/ 3rd rev. keyboard
Eric Rechlin wrote about this topic:

"All CNA534 and later units that I have used have had the new keyboard."

https://groups.google.com/forum/#!msg/co...Ss6oJkyIYJ
Find all posts by this user
Quote this message in a reply
06-30-2014, 08:55 PM (This post was last modified: 06-30-2014 08:57 PM by jebem.)
Post: #4
RE: Wanted: 49G+ w/ 3rd rev. keyboard
(06-28-2014 05:51 AM)Thomas Radtke Wrote:  Eric Rechlin wrote about this topic:

"All CNA534 and later units that I have used have had the new keyboard."

https://groups.google.com/forum/#!msg/co...Ss6oJkyIYJ

Thanks, Thomas.
I have a CNA530 but the keys looks alright so far, in fact it looks of similar quality of a 50G to me.

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
06-30-2014, 09:18 PM
Post: #5
RE: Wanted: 49G+ w/ 3rd rev. keyboard
Thanks for the info Jose. I guess finding one with a good keyboard takes some luck.

You want to sell yours by chance? :-)
Find all posts by this user
Quote this message in a reply
07-01-2014, 06:16 AM (This post was last modified: 07-01-2014 06:16 AM by jebem.)
Post: #6
RE: Wanted: 49G+ w/ 3rd rev. keyboard
(06-30-2014 09:18 PM)Thomas Radtke Wrote:  Thanks for the info Jose. I guess finding one with a good keyboard takes some luck.

You want to sell yours by chance? :-)

Sorry, I just acquired it a few months ago from TAS Spain for my collection and paid a small fortune for it.

Good luck with you hunting!

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
07-01-2014, 06:29 AM
Post: #7
RE: Wanted: 49G+ w/ 3rd rev. keyboard
(06-28-2014 05:51 AM)Thomas Radtke Wrote:  Eric Rechlin wrote about this topic:

"All CNA534 and later units that I have used have had the new keyboard."

https://groups.google.com/forum/#!msg/co...Ss6oJkyIYJ

Usenet message-id, please!

It ain't OVER 'till it's 2 PICK
Find all posts by this user
Quote this message in a reply
07-01-2014, 07:17 AM
Post: #8
RE: Wanted: 49G+ w/ 3rd rev. keyboard
(07-01-2014 06:29 AM)HP67 Wrote:  Usenet message-id, please!
Don't even know what that is. Is there a problem with the link?
Find all posts by this user
Quote this message in a reply
07-01-2014, 07:24 AM
Post: #9
RE: Wanted: 49G+ w/ 3rd rev. keyboard
Well yeah, you're providing a link to google which is not usenet. It's an archive (like all of google) of a usenet news group. I use a usenet server to read usenet, and I don't use google for anything!

It ain't OVER 'till it's 2 PICK
Find all posts by this user
Quote this message in a reply
07-01-2014, 07:53 AM
Post: #10
RE: Wanted: 49G+ w/ 3rd rev. keyboard
(07-01-2014 06:16 AM)jebem Wrote:  Sorry, I just acquired it a few months ago from TAS Spain for my collection and paid a small fortune for it.
Why? They're dead cheap if you don't care for the serial. Anyway, congrats for your finding :-).
Find all posts by this user
Quote this message in a reply
07-01-2014, 07:59 AM
Post: #11
RE: Wanted: 49G+ w/ 3rd rev. keyboard
(07-01-2014 07:24 AM)HP67 Wrote:  Well yeah, you're providing a link to google which is not usenet. It's an archive (like all of google) of a usenet news group. I use a usenet server to read usenet, and I don't use google for anything!
Ok, understand. I've given up resistance more than 10 years ago and are happy not having to hunt for free usenet servers anymore. The last groups I cared for died with the platform they covered anyway (C= Amiga computers).
Find all posts by this user
Quote this message in a reply
07-01-2014, 08:03 AM
Post: #12
RE: Wanted: 49G+ w/ 3rd rev. keyboard
For a while I ran my own usenet server. It's pretty easy. But there are still enough good free ones around to read news if you don't want to run your own.

Anyway if you can find the message ID of the post I can find it most likely. Thanks.

It ain't OVER 'till it's 2 PICK
Find all posts by this user
Quote this message in a reply
07-01-2014, 04:24 PM
Post: #13
RE: Wanted: 49G+ w/ 3rd rev. keyboard
(07-01-2014 08:03 AM)HP67 Wrote:  Anyway if you can find the message ID of the post I can find it most likely. Thanks.
Here you go (interesting read): 4a3b8nFqg133U1@individual.net
Find all posts by this user
Quote this message in a reply
07-01-2014, 04:55 PM
Post: #14
RE: Wanted: 49G+ w/ 3rd rev. keyboard
Sorry to bother you. I'm not finding that although I have most of the posts since 2007 archived. Can you post the all of the message header?

It ain't OVER 'till it's 2 PICK
Find all posts by this user
Quote this message in a reply
07-01-2014, 06:29 PM
Post: #15
RE: Wanted: 49G+ w/ 3rd rev. keyboard
(07-01-2014 04:55 PM)HP67 Wrote:  Sorry to bother you. I'm not finding that although I have most of the posts since 2007 archived. Can you post the all of the message header?

Because it's from april 2006! Smile

Path: g2news1.google.com!news1.google.com!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail
From: "Eric Rechlin" <er...@RPLhpcalc.org>
Newsgroups: comp.sys.hp48
Subject: HP 49G+ keyboard answers
Date: Tue, 11 Apr 2006 22:42:11 -0500
Lines: 96
Message-ID: <4a3b8nFqg133U1@individual.net>
X-Trace: individual.net s9XhNQzuR2lGOo+VlEaOOQ17yLcAhYmZny3v8LbO4OWcZjcYBa
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2527
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2527
X-RFC2646: Format=Flowed; Original
Xref: g2news1.google.com comp.sys.hp48:5818

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
07-01-2014, 06:31 PM
Post: #16
RE: Wanted: 49G+ w/ 3rd rev. keyboard
(07-01-2014 06:29 PM)Massimo Gnerucci Wrote:  Because it's from april 2006! Smile

Darnit! Now my only hope is to get you to paste it from google groups since none of the other servers I know of retains it that long. Sad

Thanks, Massimo.

It ain't OVER 'till it's 2 PICK
Find all posts by this user
Quote this message in a reply
07-01-2014, 08:30 PM
Post: #17
RE: Wanted: 49G+ w/ 3rd rev. keyboard
(07-01-2014 06:31 PM)HP67 Wrote:  
(07-01-2014 06:29 PM)Massimo Gnerucci Wrote:  Because it's from april 2006! Smile

Darnit! Now my only hope is to get you to paste it from google groups since none of the other servers I know of retains it that long. Sad

Thanks, Massimo.

Here we go! But you should do something for this Google idiosyncrasy... Wink

I don't normally post to this newsgroup, but I do read everything. However,
I feel the point has come where I need to settle some things.

There has been a lot of misinformation over the years about the keyboard in
the HP 49G+. I have used a large number of 49G+ calculators and every
single ROM, so I feel I am in a good position to analyze the different types
of keyboards, so I will try to set things straight as best as I can.

First, as most of you are aware, the problems in the 49G+ keyboard have been
caused by both hardware and software.

The very first 49G+ units had an absolutely terrible keyboard. These were
all made in 2003 (mostly CN33 and CN34 serial numbers), and they are easily
identified by the loud, hollow clicking sounds when pressing keys. The keys
required a significant amount of force to press, and missed keystrokes were
common. The keys also frequently broke under use that most would not
consider abuse.

The manufacturing process for the keyboard appears to have been changed at
the end of 2003. The first unit I used with the second-generation keyboard
had a serial number starting with CN352. This later keyboard required less
force to press and was quieter than the original keyboard. However,
reliability was only slightly improved, with missed keystrokes still common
and the "loose tooth" broken key problem at least as bad as before.

Most readers of this group probably have 49G+ calculators with this
second-generation keyboard, as it was produced for about a year and a half.
All CN4 and CNA4 units, as well as the early CNA5 units and a few very late
CN3 units, have the second-generation keyboard.

The third-generation keyboard was introduced in mid-2005. I have seen
several units with CNA515 serial numbers with the third-generation keyboard,
but I have also seen several CNA52 units with the second-generation
keyboard, so it seems to have been slowly introduced. All CNA534 and later
units that I have used have had the new keyboard.

The third-generation keyboard is easy to detect. The plastic used in the
keys, as well as the mechanics behind the keys, have both changed. I do not
know whether there are any units with only one of these changes, so there
may be some hybrids out there, but I have not seen or heard of any.

The new plastic is a lot more flexible, and it makes the keys significantly
more durable. It would take a large amount of abuse to damage the
third-generation keyboard, so broken keys should be a thing of the past.
This new plastic can be identified visually, as the plastic itself is
slightly smoother, and the key labels are slightly less shiny. The keys now
have metal domes behind them, which make them feel a lot like HP
48SX/GX-style keys. Key travel is slightly shorter, and they feel more
responsive. They are also far more reliable, so no keystrokes should be
lost in normal use.

The newest keyboards have been available on the retail market in the US for
the last few months, so calculators purchased this year may be of the new
design.

This means the hardware problem has been definitively solved, which brings
us to the software problems.

The early 1.2x 49G+ ROMs were a disaster, and many keystrokes were lost
somewhere in software on those ROMs. It doesn't really matter if they were
lost in the operating system (Kinpo OS) or the Saturn emulator, because the
49G ROM never saw the keystrokes.

ROM 2.00 Build 50 changed the key handling, meaning that individual
keystrokes were no longer lost in software. However, there was so much
variation within the apparently large manufacturing tolerances in the
keyboards that its keybounce settings were rarely appropriate. Many users
reported either doubled keystrokes (keybounce time set too short), and other
users reported having the second keystroke in an intentionally doubled
series being missed (keybounce time set too long).

Various 2.01 builds tried different keybounce timings, but due to the poor
hardware in the first and second-generation keyboards, nothing worked
perfectly for everybody.

ROM 2.05-4 Build 88 brought back the KEYTIME commands. This allowed the
user to set the keybounce timing in 20-millisecond increments, so it could
be set appropriately for any hardware. This was the first ROM that could
truly be considered reliable for keyboard entry. Of course, this assumes it
is being used on reliable hardware.

The new, third-generation metal dome keyboard does an amazing job at
eliminating keybounce. Setting the KEYTIME to as low as 160 ticks (that's
just 20 milliseconds) still has no bounce, and buttons can be pressed as
fast as humanly possible with no missed keystrokes.

In summary: Get a 49G+ with a serial number of CNA534 or higher, install ROM
2.06, and you should never have any more missed keystrokes or broken keys.

Regards,

Eric Rechlin

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
07-02-2014, 06:03 AM
Post: #18
RE: Wanted: 49G+ w/ 3rd rev. keyboard
Thanks, that was very nice of you Smile

It ain't OVER 'till it's 2 PICK
Find all posts by this user
Quote this message in a reply
07-17-2014, 01:15 AM
Post: #19
RE: Wanted: 49G+ w/ 3rd rev. keyboard
I have a 49G that is still new in the package. I can't see the serial number, but I will be happy to share any info from the package if that will help you determine the version.

Thanks,
Don

(06-26-2014 07:58 AM)Thomas Radtke Wrote:  Since german ebay is of no use here and not every seller in the US likes to give the serial number, I ask here for a 49G+ with last revision keyboard. A manual and a case would be nice.
Find all posts by this user
Quote this message in a reply
07-17-2014, 05:27 AM
Post: #20
RE: Wanted: 49G+ w/ 3rd rev. keyboard
Hi Don,

thank you for your answer. I'm not seeking for a 49G but a 49G+.

More important than its condition (or even that it's NIB) is the keyboard as I intend to actually use it.

best regards,

Thomas
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)