Post Reply 
(12C) Square Root
10-02-2019, 10:23 AM (This post was last modified: 10-03-2019 04:10 AM by Gamo.)
Post: #1
(12C) Square Root
For case study purpose here is the very interesting algorithm to compute the square root of a number
by using this equation.

B = [A+(n÷A)] ÷ 2

This equation used Successive Approximation Algorithms that continue to better approximate some desired result by providing the initial guess then this program will converge on to the correct answer if your initial guess is bad then more iteration will be required to achieve a giving accuracy.
With this program it doesn't matter where you start your initial guess because this algorithm also used the
Change in the Approximation: ABS [(B-A) ÷ A] and Tolerance of 0.00000001 to guarantee that the result will be possible.

This equation solves for B, which is the new improved approximation for the square root of n until we are happy with this approximation, we continue repeating the process by coping the new B value into A and then re-executing the same equation to get a new B value.
-----------------------------------
Procedure: FIX 8
n [ENTER] A [R/S] display Answer [X<>Y] number of iterations
-----------------------------------
Example: √10 used 3 as a guess

10 [ENTER] 3 [R/S] 3.16227766 [X<>Y] 3.00000000

Answer: √10 = 3.16227766 and program took 3 iterations to get this answer.
------------------------------------
Program:
Code:

01 STO 2  // A
02 R↓
03 STO 1  // n
04  0
05 STO 0  // Counter 
06 RCL 1  
07 RCL 2  
08  ÷   
09 LSTx  
10  +
11  2
12  ÷ 
13 STO 3  // Store B
14 RCL 2
15  -
16 LSTx
17  ÷
18  0
19 X<>Y
20 X≤Y
21 CHS
22 EEX
23 CHS
24  8
25 X<>Y
26 X≤Y
27 GTO 33
28 RCL 3  // B
29 STO 2  // Store A
30  1
31 STO+0
32 GTO 06
33 RCL 0
34 RCL 3
35 GTO 00

Gamo
Find all posts by this user
Quote this message in a reply
10-02-2019, 02:36 PM (This post was last modified: 10-15-2020 11:45 PM by Albert Chan.)
Post: #2
RE: (12C) Square Root
It might be better not asking the user to supply a possibly bad guess.

Instead, user is limited to enter value between 0.1 to 10
For example, N=12345, user entered n=1.2345, √N = 100 √n

A naive guess = 0.5*(1+n) might create big relative errors.
Worst case at the edge, n=0.1 or 10

max_rel_err = |1 - 0.5*11/√10| ≈ 0.7393 ≈ 74%

Each iteration reduce max_rel_err to around ½(prev_rel_err)², we got:
Ref: http://www.azillionmonkeys.com/qed/sqroot.html

0.7393 → 0.2732 → 0.03733 → 0.0006968 → 2.428e-7 → 2.947e-14

Thus, a maximum of 5 iterations to reach 10 digits accuracy.

A better guess = k * (1+n), such that rel_err(n=1) = - rel_err(n=10).
In other words, |rel_error| for n = 0.1 to 10 have 3 peaks, with W shape.

XCas> simplify(solve(1-k*2/1 = k*11/sqrt(10) - 1, k))     → k = (22√10 - 40)/81 ≈ 0.365

guess = 0.365 * (1 + n) reduced max_rel_err to 27%, thus required at most 4 iterations.

Ref: Numerical Analysis by Ridgway Scott, section 1.3.2, the best start
Find all posts by this user
Quote this message in a reply
10-03-2019, 02:01 AM (This post was last modified: 10-03-2019 04:13 AM by Gamo.)
Post: #3
RE: (12C) Square Root
Thanks Albert Chan
Very interesting article.

I have streamline this program a bit, now no counter, with an educated guess,
program will take on average less than 5 iterations.
This program update included Pause to observe each iterations until converge to an answer.

Program:
Code:

01 STO 2
02 R↓
03 STO 1
04 RCL 1
05 RCL 2
06  ÷
07 LSTx
08  +
09  2
10  ÷
11 PSE
12 STO 3
13 RCL 2
14  -
15 LSTx
16  ÷
17  0
18 X<>Y
19 X≤Y
20 CHS
21 EEX
22 CHS
23  8
24 X<>Y
25 X≤Y
26 GTO 30
27 RCL 3
28 STO 2
29 GTO 04
30 RCL 3

Hints:
Program line 17 to 20 is the [ABS] function with this routine we avoid using n [ENTER] [x] [√x] because
it is kind of funny to use [√x] in program while this program is looking for the Square Root. Smile
This [ABS] function routine is also work good on HP-10C I have post earlier here

https://www.hpmuseum.org/forum/thread-12138.html

Gamo
Find all posts by this user
Quote this message in a reply
09-28-2020, 05:18 PM
Post: #4
RE: (12C) Square Root
(10-02-2019 02:36 PM)Albert Chan Wrote:  guess = 0.365 * (1 + n) reduced max_rel_err to 27%, thus required at most 4 iterations.

Turns out above is not the optimal. It should be guess = 0.37913 * (1+n), 0.1 ≤ n ≤ 10

For increasing function, Newton's method preferred a guess on the right.
I learned about this from "Fast Inverse Square Root", by Chris Lomon

One application of Newton's method automatically gives a guess, to the right of actual root.
Example, sqrt(n = 0.7) ≈ 0.83666

x = 0.37913*(1+n) ≈ 0.64452 (guess to the left of root)
x = (x + n/x) / 2     ≈ 0.86530 (guess, now to the right)

XCas> nt(x,n) := (x + n/x)/2
XCas> relerr(k,n) := 1 - nt(k*(1+n),n) / sqrt(n)        // note: relative error ≤ 0
XCas> solve(relerr(k,1) = relerr(k,10) and k>0, k)    → \([\sqrt{\sqrt{10} / 22}]\)
XCas> k0 := approx(ans()[0])                                 → 0.379130444101

Relative error (worst case) at n=0.1, or 1., or 10.
With guess = k0*(1+n), how many iterations to ensure full convergence ? Try n=1 (note: √1=1)

XCas> nt(k0*2, 1)       → 1.03853409762
XCas> nt(ans(), 1)       → 1.00071489067
XCas> nt(ans(), 1)       → 1.00000025535
XCas> nt(ans(), 1)       → 1.0

4 Newton iterations will converged to full 12 digits

P.S. above shows Newton's method on square-root, convergence rate ≈ ε²/2
Find all posts by this user
Quote this message in a reply
09-28-2020, 07:14 PM
Post: #5
RE: (12C) Square Root
(10-02-2019 02:36 PM)Albert Chan Wrote:  Ref: Numerical Analysis by Ridgway Scott, section 1.3.2, the best start

Scott's best start = (1+n) * a, where a = -8 + 6√2 ≈ 0.485281374239 was a little off.

Minimized relative errors of guess and actual root is not enough.
Taking account the effect of Newton's method, reusing previous post defined relerr()

XCas> solve(relerr(k,1) = relerr(k,2) and k > 0, k)       → \([\sqrt{\sqrt{2} / 6}]\)
XCas> a := approx(ans()[0])                                      → 0.485491771707

I tested this in lua, with added 3 Newton's iterations.
Note: Newton's iterations treated in pairs, to optimize away 1 multiply.

Code:
function fastsqrt(x)
    local g, e = frexp(x)
    if e%2 ~= 0 then g, e = g+g, e-1 end
    x = (1+g) * 0.97098 -- factor to miminize relative error
    x = x*0.25 + g/x    -- abs(1- x/g) < 4.337e-4
    x = x + g/x         -- abs(1-2x/g) < 9.400e-8
    return ldexp(x*0.25 + g/x, e*0.5)
end

Expected maximum relative error ≈ ε²/2 = (9.4e-8)²/2, ≈ 4.4e-15
And, it should occur when x is pow-of-2, or close to it.

lua> x = 1
lua> for i=1,11 do print(x, fastsqrt(x)); x=x*100 end

1         1.0000000000000044
100       10
10000     100
1e+006    1000.0000000000041
1e+008    10000
1e+010    100000
1e+012    1000000.0000000033
1e+014    1e+007
1e+016    1e+008
1e+018    1000000000.0000021
1e+020    1e+010
Find all posts by this user
Quote this message in a reply
09-28-2020, 09:45 PM
Post: #6
RE: (12C) Square Root
Report No. NADC-91067-50, the Square Root CORDIC, NAVAL AIR SYSTEMS COMMAND, NAVAL AIR DEVELOPMENT CENTER, Mission Avionics Technology Department, AD-A242 318, JUL 1991, may be of minor interest:
"     The CORDIC (Coordinate Rotation Digital Computer) algorithm, computes certain functions such as the sine, cosine, and √(x² + y²) using only additions and bit shifting operations.
     We have implemented an integer math CORDIC algorithm on a high speed RISC processor. During the course of this work, we identified a convergence problem with the √(x² + y²) CORDIC.  A solution to this problem is presented along with an overview of this algorithm. "

BEST!
SlideRule
Find all posts by this user
Quote this message in a reply
06-08-2021, 03:36 PM (This post was last modified: 06-09-2021 11:24 AM by Albert Chan.)
Post: #7
RE: (12C) Square Root




Inspired by ∫(1/(a - cos(x)), x=0..pi) = pi/√(a²-1), I find another way to get 1/√(a²-1)

For x = 0 to pi, cos(x) = 1 to -1, we can approximate integral without cos(x) term:

∫(1/(a - cos(x)), x=0..pi) ≈ pi/a                     → 1/√(a²-1) ≈ 1/a

∫(1/(a - cos(x)), x=0..pi)
= ∫(1/(a - cos(x)) + 1/(a + cos(x)), x=0 .. pi/2);         // fold the integral
= 2*a * ∫(1/ (a² - cos(x)²), x = 0..pi/2)
= 4*a * ∫(1/ (2*a² - (1 + cos(2*x))), x = 0..pi/2);      // let y = 2*x
= 2*a * ∫(1/ (a2-cos(y)), y = 0..pi);                           // let a2=2*a²-1

Again, dropping cos(y), we have:

∫(1/(a - cos(x)), x=0..pi) ≈ 2*a/a2 * pi          → 1/√(a²-1) ≈ (1/a)·(1+1/a2)

Rinse and repeat, let ak = 2*ak-1² - 1, we have 1/√(a²-1) = (1/a)·(1+1/a2)·(1+1/a3) ...

Convergence is quadratic, example, with a=2

1/√3 = (1/2)·(1+1/7)·(1+1/97)·(1+1/18817)·(1+1/708158977) ...

Or, we flip both side:

√3 = 2·(1-1/8)·(1-1/98)·(1-1/18818)·(1-1/708158978) ...

function seq(a) -- sequence converging to sqrt(a*a-1), a > 1
local t = a
return function() a=2*a*a; t=t-t/a; a=a-1; return t end
end

lua> g = seq(2)
lua> for i=1,4 do print(i, g()) end
1 1.75
2 1.7321428571428572
3 1.7320508100147276
4 1.7320508075688774

This is equivalent to Newton's method for √N, N=a*a-1, guess x=a:

lua> N, x = 3, 2
lua> for i=1,4 do x=(x+N/x)/2; print(i, x) end
1 1.75
2 1.7321428571428572
3 1.7320508100147274
4 1.7320508075688772
Find all posts by this user
Quote this message in a reply
12-21-2023, 11:50 PM
Post: #8
RE: (12C) Square Root
I will calculate quickly on a regular calculator, so that there are more numbers on the display. There is a very simple calculation algorithm that was used in Soviet Iskra (Spark) computers back in the 1970s. All that is required is the arithmetic operation of subtraction and multiplication by 10 (in essence, this is the addition of the inverse of the number and the shift registr of the left).
We divide the number into groups of 2 digits before and after the decimal point. If one digit remains, it counts as a group. Next, we use the amazing property of odd numbers — their sum is equal to the square of the number of items.
For example 1=1²; 1+3=4=2²; 1+3+5=9=3²; 1+3+5+7=16=4².

We proceed as follows - from the first group on the left, we subtract odd numbers, starting with 1.


Example.
10-1=9-3=6-5=1
The number of successful subtractions of 3 is the first digit of the root. We add the numbers of the next group.

100
We subtract odd numbers, start with the number obtained in this way — the number that gave a negative result remains, multiply by 10 and subtract 9.

7*10-9=61
100-61=39-63=-24
The second digit of the root is 1. The root is 3.1
New group 3900
The new number is 621
3900-621=3279-623=2656-625=2031-627=1404-629=775-631=144-633=-489
The third digit of the root is 6. The root is 3.16
New group 14400
The new number is 6321
14400-6321=8079-6323=1756
1756-6325=-4569
The root is 3.162
New group 175600
The new number is 63241
175600-63241=112359-63243=49116
The root is 3.1622
Group 4911600
The number is 632421
4911600-632421=4279179-632423=3646756-632425=3014331-632427=2381904-632429=1749475-11170444-632431=484611
The root is 3.1627
Group 48461100
The number is 6324321
And so on. The number of digits after the decimal point is determined by the size of the number with which the device works. For a pen and pencil, this is a lot, and for a calculator, it is 4-6 characters, because only up to 13 digits of the mantissa.
Find all posts by this user
Quote this message in a reply
12-23-2023, 01:48 AM
Post: #9
RE: (12C) Square Root
Interesting algorithm! I think you have a typo at: “The root is 3.1627”. It should be 3.16227. Just a typo, the algorithm correctly produced the 2nd “2” in the previous iteration.
Visit this user's website Find all posts by this user
Quote this message in a reply
12-23-2023, 04:26 AM
Post: #10
RE: (12C) Square Root
(12-23-2023 01:48 AM)Dave Hicks Wrote:  Interesting algorithm!

This is the good old digit by digit method.

Here's a program for the HP-42S:
Code:
00 { 50-Byte Prgm }
01▸LBL "√"
02 1
03 X<>Y
04 0
05 X<>Y
06▸LBL 00
07 RCL- ST Z
08 X<0?
09 GTO 01
10 1
11 STO+ ST Z
12 STO+ ST X
13 STO+ ST T
14 R↓
15 GTO 00
16▸LBL 01
17 RCL+ ST Z
18 10
19 STO× ST T
20 STO× ST Z
21 X↑2
22 ×
23 9
24 STO- ST T
25 R↓
26 STOP
27 GTO 00
28 END

Example

10
XEQ "√"

y: 30
x: 100

R/S

y: 310
x: 3900

R/S

y: 3160
x: 14400

R/S

y: 31620
x: 175600

R/S

y: 316220
x: 4911600

R/S

y: 3162270
x: 48447100


But we can do better using David Cochran's trick, multiplying the number by 5.
Therefore we only have to keep track of the subtrahend.
We just ignore the trailing 5 in the result.

Code:
00 { 45-Byte Prgm }
01▸LBL "√"
02 5
03 ×
04 LASTX
05 X<>Y
06▸LBL 00
07 RCL- ST Y
08 X<0?
09 GTO 01
10 10
11 STO+ ST Z
12 R↓
13 GTO 00
14▸LBL 01
15 RCL+ ST Y
16 10
17 STO× ST Z
18 X↑2
19 ×
20 45
21 STO- ST Z
22 R↓
23 STOP
24 GTO 00
25 END

Example

10
XEQ "√"

y: 305
x: 500

R/S

y: 3105
x: 19500

R/S

y: 31605
x: 72000

R/S

y: 316205
x: 878000

R/S

y: 3162205
x: 24558000

R/S

y: 31622705
x: 242235500


This method is used in most HP calculators.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)