Post Reply 
Anyone Have an .stl of a 65/67 Battery Cover?
12-03-2019, 09:06 PM
Post: #1
Anyone Have an .stl of a 65/67 Battery Cover?
Hi, all...

I looked at the thread on 3D printing battery covers – no joy. Anyone have an .stl of a 65/67 battery cover? I got an HP67 at a good price because it doesn’t have a battery pack or cover. Battery pack's not a problem, but the cover...

Or does anyone have one that they can laser scan? I’d cover the cost, of course.

TIA,

Tim
___________________________
HP11C, HP12C, HP25, HP32E, HP33E, HP33C, HP35, HP35S, HP41C, HP45, HP55, HP48SX, HP67, DM41 X
Find all posts by this user
Quote this message in a reply
12-06-2019, 01:38 PM
Post: #2
RE: Anyone Have an .stl of a 65/67 Battery Cover?
If you have a digital caliper (in mm) and send me all the photos of the dimesions, I can make the model for you.

My website: ried.cl
Visit this user's website Find all posts by this user
Quote this message in a reply
12-06-2019, 03:21 PM
Post: #3
RE: Anyone Have an .stl of a 65/67 Battery Cover?
Is this what you are looking for?

https://www.shapeways.com/product/3ZCXQZ...arketplace

Bernhard

That's one small step for a man - one giant leap for mankind.
Find all posts by this user
Quote this message in a reply
12-06-2019, 04:11 PM
Post: #4
RE: Anyone Have an .stl of a 65/67 Battery Cover?
(12-06-2019 03:21 PM)PANAMATIK Wrote:  Is this what you are looking for?

https://www.shapeways.com/product/3ZCXQZ...arketplace

Bernhard

That is for the classics, but does not fit the 65/67.
Find all posts by this user
Quote this message in a reply
12-09-2019, 10:07 AM
Post: #5
RE: Anyone Have an .stl of a 65/67 Battery Cover?
Thanks, all... for some reason, I never get notifications of replies...

TIA,

Tim
___________________________
HP11C, HP12C, HP25, HP32E, HP33E, HP33C, HP35, HP35S, HP41C, HP45, HP55, HP48SX, HP67, DM41 X
Find all posts by this user
Quote this message in a reply
12-09-2019, 11:43 AM
Post: #6
RE: Anyone Have an .stl of a 65/67 Battery Cover?
(12-06-2019 01:38 PM)eried Wrote:  If you have a digital caliper (in mm) and send me all the photos of the dimesions, I can make the model for you.

Thanks eried, but I don't actually have one to measure...

TIA,

Tim
___________________________
HP11C, HP12C, HP25, HP32E, HP33E, HP33C, HP35, HP35S, HP41C, HP45, HP55, HP48SX, HP67, DM41 X
Find all posts by this user
Quote this message in a reply
12-11-2019, 08:12 PM
Post: #7
RE: Anyone Have an .stl of a 65/67 Battery Cover?
(12-09-2019 11:43 AM)Ignatz Wrote:  
(12-06-2019 01:38 PM)eried Wrote:  If you have a digital caliper (in mm) and send me all the photos of the dimesions, I can make the model for you.

Thanks eried, but I don't actually have one to measure...

I have one and could do the measuring.
Find all posts by this user
Quote this message in a reply
12-12-2019, 08:40 AM
Post: #8
RE: Anyone Have an .stl of a 65/67 Battery Cover?
(12-11-2019 08:12 PM)Harald Wrote:  I have one and could do the measuring.

Great, post a couple of photos Smile top, side, bottom placing the caliper measuring some of the features of it.

My website: ried.cl
Visit this user's website Find all posts by this user
Quote this message in a reply
12-13-2019, 02:55 AM (This post was last modified: 12-13-2019 05:14 AM by twoweims.)
Post: #9
RE: Anyone Have an .stl of a 65/67 Battery Cover?
I am working on a model now.
I will print this weekend to verify fit and then post the model on thingiverse.

First layer printing now...

   

First iteration complete.
Good fit. I just need to tweak the latch slots for proper fit...

   
Visit this user's website Find all posts by this user
Quote this message in a reply
12-13-2019, 04:34 PM
Post: #10
RE: Anyone Have an .stl of a 65/67 Battery Cover?
Here is a link to my model on Thingiverse:

https://www.thingiverse.com/thing:4045631


The original HP Latches work just fine. There is someone on this forum who has made 3D Printed latches but I can't find it at the moment.

[attachment=7923]
Visit this user's website Find all posts by this user
Quote this message in a reply
12-13-2019, 05:38 PM
Post: #11
RE: Anyone Have an .stl of a 65/67 Battery Cover?
(12-13-2019 04:34 PM)twoweims Wrote:  There is someone on this forum who has made 3D Printed latches but I can't find it at the moment.
Do you mean the latches found on shapeways?
https://www.shapeways.com/product/4LTRMC...arketplace

Never saw another option here in the forum.
Find all posts by this user
Quote this message in a reply
12-13-2019, 06:59 PM
Post: #12
RE: Anyone Have an .stl of a 65/67 Battery Cover?
So shall I still measure the lid? I guess that is not really necessary anymore.

Ok, next request: Who will make model for a spice case?
Find all posts by this user
Quote this message in a reply
12-14-2019, 12:54 AM
Post: #13
RE: Anyone Have an .stl of a 65/67 Battery Cover?
(12-13-2019 04:34 PM)twoweims Wrote:  Here is a link to my model on Thingiverse:

https://www.thingiverse.com/thing:4045631


The original HP Latches work just fine. There is someone on this forum who has made 3D Printed latches but I can't find it at the moment.

Great! Also with that texture in your printing bed, it looks very good

My website: ried.cl
Visit this user's website Find all posts by this user
Quote this message in a reply
12-14-2019, 04:35 AM
Post: #14
RE: Anyone Have an .stl of a 65/67 Battery Cover?
Now if I could only find filament that matches the color...
I have some that is pretty close but not quite the right color.
Visit this user's website Find all posts by this user
Quote this message in a reply
12-15-2019, 01:43 AM
Post: #15
RE: Anyone Have an .stl of a 65/67 Battery Cover?
(12-14-2019 04:35 AM)twoweims Wrote:  Now if I could only find filament that matches the color...
I have some that is pretty close but not quite the right color.

Wow! Thanks, everyone... I really don’t want to appear ignorant, but I NEVER get notifications of replies to threads that I start...

Looking forward to how this will develop.. picked up a 3D printer in the Black Friday sales...

TIA,

Tim
___________________________
HP11C, HP12C, HP25, HP32E, HP33E, HP33C, HP35, HP35S, HP41C, HP45, HP55, HP48SX, HP67, DM41 X
Find all posts by this user
Quote this message in a reply
12-15-2019, 02:12 PM
Post: #16
RE: Anyone Have an .stl of a 65/67 Battery Cover?
(12-15-2019 01:43 AM)Ignatz Wrote:  I NEVER get notifications of replies to threads that I start...
I don't think this forum offers notifications, you just have to look for updates (which are highlighted).
Find all posts by this user
Quote this message in a reply
12-15-2019, 02:19 PM
Post: #17
RE: Anyone Have an .stl of a 65/67 Battery Cover?
(12-15-2019 02:12 PM)Don Shepherd Wrote:  
(12-15-2019 01:43 AM)Ignatz Wrote:  I NEVER get notifications of replies to threads that I start...
I don't think this forum offers notifications, you just have to look for updates (which are highlighted).

I got a notification for your post, Don... first one ever!!! there's an option when you post: 'Subscribe and receive email notification of new replies'.

TIA,

Tim
___________________________
HP11C, HP12C, HP25, HP32E, HP33E, HP33C, HP35, HP35S, HP41C, HP45, HP55, HP48SX, HP67, DM41 X
Find all posts by this user
Quote this message in a reply
12-15-2019, 02:26 PM
Post: #18
RE: Anyone Have an .stl of a 65/67 Battery Cover?
(12-15-2019 02:19 PM)Ignatz Wrote:  
(12-15-2019 02:12 PM)Don Shepherd Wrote:  I don't think this forum offers notifications, you just have to look for updates (which are highlighted).

I got a notification for your post, Don... first one ever!!! there's an option when you post: 'Subscribe and receive email notification of new replies'.

Oh, I didn't know that.
Yes, now I see it at the bottom of the screen.

interesting.
Find all posts by this user
Quote this message in a reply
12-15-2019, 07:31 PM
Post: #19
RE: Anyone Have an .stl of a 65/67 Battery Cover?
(12-15-2019 01:43 AM)Ignatz Wrote:  
(12-14-2019 04:35 AM)twoweims Wrote:  Now if I could only find filament that matches the color...
I have some that is pretty close but not quite the right color.

Wow! Thanks, everyone... I really don’t want to appear ignorant, but I NEVER get notifications of replies to threads that I start...

Looking forward to how this will develop.. picked up a 3D printer in the Black Friday sales...

Have fun with that 3D Printer!
Visit this user's website Find all posts by this user
Quote this message in a reply
03-20-2020, 01:07 PM
Post: #20
RE: Anyone Have an .stl of a 65/67 Battery Cover?
Well, I ended up buying an original battery door cover, but after my little 'mishap' last night (see my post from this morning), I'll need to get one printed. However, looking a Twoweim's post on Thingiverse, I can't see any way to order it printed (last time, for the Woodstock battery holder, I'm sure I just clicked 'Order This Printed' and the piece turned up a few days later...)

Can anyone point me in the right direction?

TIA,

Tim
___________________________
HP11C, HP12C, HP25, HP32E, HP33E, HP33C, HP35, HP35S, HP41C, HP45, HP55, HP48SX, HP67, DM41 X
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)