HP Forum Archive 21

[ Return to Index | Top of Index ]

HP-41's ARCL on the 32S-II Message #1 Posted by Matt Agajanian on 2 May 2012, 12:32 p.m. Hello all. Is there a way to accomplish this on the 32S-II (or 33s and 35s: Appending a variable's value to an already existing string in the EQN register and display the EQN line (with the Flag 10 manoeuvres, obviously). For example, Could I have something like this: 01- LBL M 02- RCL V 03- 661.5 04- / 05- the rest of the Mach Value equation 06-... 07-... 34- STO M 35- SF 10 36- EQN 'MACH=' 37-this is where I want to append either the X register Mach value or Variable M and then display that so it looks like MACH=0.8357 when I display the Equation line ... nnn- R/S nnn- CF 10 Any ideas? Thanks Edited: 2 May 2012, 12:33 p.m.

Re: HP-41's ARCL on the 32S-II Message #2 Posted by Dieter on 3 May 2012, 5:58 p.m., in response to message #1 by Matt Agajanian Sorry, there is nothing like ARCL on the 33s or 35s. The two closest ways to accomplish something similar are these: . . (calculation) . STO M VIEW M This results in M= 1,2345 Or, a bit more verbose: . . (calculation) . SF 10 EQN "MACH=" PSE CF 10 RTN This displays "MACH=" first and the value afterwards. Still don't like it? Get a 41/42. Or have your 20B/30B flashed. ;-) Dieter

Re: HP-41's ARCL on the 32S-II Message #3 Posted by Matt Agajanian on 4 May 2012, 4:45 p.m., in response to message #2 by Dieter Yeah. I like the idea. Very concise and to the point. I just was curious if there was another programming technique possible that I hadn't considered. The way I see it, our group is filled with geniuses and very experienced HP users. So, I just had to ask to see if another one here had a better solution that I might not have been able to design. No problem. Thanks again.

[ Return to Index | Top of Index ]

Go back to the main exhibit hall