HP Forum Archive 20

[ Return to Index | Top of Index ]

Re: HP-67 advice needed Message #1 Posted by Alberto Fenini on 17 Jan 2011, 9:13 a.m. Thanks Randy, I have printed out everything, and I'll do some more tests I'll keep posted the results here again, thank you very much, Alberto

Re: HP-67 advice needed Message #2 Posted by Alejandro Paz (Germany) on 18 Jan 2011, 1:47 a.m., in response to message #1 by Alberto Fenini You may consider re-drawing the board and getting it made. You went to the trouble of removing all the components. You can even get it gold-plated like in the old days :)

Re: HP-67 advice needed Message #3 Posted by Alberto Fenini on 18 Jan 2011, 4:53 p.m., in response to message #2 by Alejandro Paz (Germany) It's not a bad idea, actually I'm in touch with someone for making a replica of an HP65 card reader pcb, but it's more complicated that we can imagine. Not because of the complexity of the layout, but because of the thickness which is a not a common format nowadays. The price is about 45 € for the master, and 10/15 € each unit produced. Price could slightly increase for the master since the shape is not a regular rectangle. Should this work (the guy is based in Sicily and I live in Milano, so logistic is slow and complex) it could be worth doing this for an HP67 logic PCB. Thanks for suggestion, take care Alberto

Re: HP-67 advice needed Message #4 Posted by Alejandro Paz (Germany) on 26 Jan 2011, 3:23 p.m., in response to message #3 by Alberto Fenini Alberto: The people at bilex-lp.com (I'm not affiliated with them) make also 0.5 mm pcbs and 0.8 mm too. The prices are very similar.

[ Return to Index | Top of Index ]

Go back to the main exhibit hall