HP Forum Archive 15

[ Return to Index | Top of Index ]

HP 45 Charger Message #1 Posted by Neil J Strickland on 25 Jan 2006, 10:06 p.m. I recently purchased a HP45 with a charger made for the US. I have a charger for the HP67 made for Australia. It says "INPUT: 172 to 254V AC, 50HZ, 5Watts - OUTPUT: 50MA, 4.2V, 4V, 150MA". Does anybody know whether I can safely use this with the HP 45 or am I likely to fry it? Thanks

Re: HP 45 Charger Message #2 Posted by Hal on 25 Jan 2006, 11:32 p.m., in response to message #1 by Neil J Strickland Hi Neil, Both of those machines (67 and 45) use the same battery pack. The chargers should be interchangable. If your Aussie charger will fit the receptacle on the 45, this is further assurance of compatability. However, just to be sure, please wait for confirmation from another one of the fine individuals who posts regularly on this forum, which I'm sure will be forthcoming. Best regards, Hal

Re: HP 45 Charger Message #3 Posted by Tony Duell on 26 Jan 2006, 5:53 a.m., in response to message #1 by Neil J Strickland The HP67 and HP45 use the same chargers. And the outputs you've quoted will are right for the 45 too.

Re: HP 45 Charger Message #4 Posted by Neil J Strickland on 27 Jan 2006, 9:34 p.m., in response to message #1 by Neil J Strickland Thanks Hal and Tony for your help!

[ Return to Index | Top of Index ]

Go back to the main exhibit hall