The Museum of HP Calculators

HP Forum Archive 15

[ Return to Index | Top of Index ]

Re: HP-97 printer gear
Message #1 Posted by Jürgen Sammler on 3 June 2005, 4:15 p.m.

I had the same problem, the middle gear lost it's teeth. It is the one with 30 teeth.

I found one at (made from brass):

GHW Modellbau Gewerbering 29 D - 41372 Niederkrüchten (Germany) Tel. 02163-81767 Fax 02163-82670 e-mail: ghw@ghw-modellbau.de Internet: www.ghw-modellbau.de

Part-No. 753030, 2,65 Euro. Ask for shipping. The diameter of bore is 2mm, you must fit it to the axis.

Now my HP-97 prints very well.

      
Re: HP-97 printer gear
Message #2 Posted by Nelson M. Sicuro (Brasil) on 3 June 2005, 9:34 p.m.,
in response to message #1 by Jürgen Sammler

I need the very same gear for my '97, but I don't speak German. It is possible to send one gear here to Brazil? Can you ask them for the costs?

Thanks!!

Nelson

            
Re: HP-97 printer gear
Message #3 Posted by Chan Tran (USA) on 5 June 2005, 12:53 p.m.,
in response to message #2 by Nelson M. Sicuro (Brasil)

Can you get me one too?

[ Return to Index | Top of Index ]

Go back to the main exhibit hall