HP Forum Archive 14

[ Return to Index | Top of Index ]

33s: section properties for rectangular composite bodies Message #1 Posted by Eric Lundgren on 1 Apr 2005, 1:45 p.m. If anyone's interested, I've written a program that computes the neutral axis (Ybar) and x-section moment of inertia (Ix)for any build up of n rectangular components (ie. uneven I-beam, sandwich construction). Inputs are prompted: N (no. of components) Prompted for each component: B (base dimension) H (height dim) Outputs to the x and y register: Y: neutral axis of composite X: x-sect moment of inertia of composite It uses two labels (could be done with one, but as it is it works) I'm sure there's others out there. Happy to share, send an email to erikuma815@yahoo.com Eric

Re: 33s: section properties for rectangular composite bodies Message #2 Posted by bill platt on 1 Apr 2005, 1:59 p.m., in response to message #1 by Eric Lundgren Hi Eric, I have a similar program I wrote for the 11c and on. I would be interested in comparing. plattdesign.net Regards, Bill

Re: 33s: section properties for rectangular composite bodies Message #3 Posted by Eric Lundgren on 1 Apr 2005, 11:16 p.m., in response to message #2 by bill platt Hi Bill, I'll be typing it up tonight, to have a backup in case of a 'memory clear'. Would you like me to email it, or should I post it here? Eric

[ Return to Index | Top of Index ]

Go back to the main exhibit hall