HP Forum Archive 14

[ Return to Index | Top of Index ]

HP 67 printer port Message #1 Posted by Gilles C. on 26 Nov 2004, 3:59 a.m. Bonjour. Does anyone knows if it is possible to adapt a printer port to the HP 67 and use the included printer instructions ? Thanks.

Re: HP 67 printer port Message #2 Posted by Karl-Ludwig Butte on 29 Nov 2004, 10:08 a.m., in response to message #1 by Gilles C. I don't think so. Even if it would be possible to connect a printer to the 67 (have a look at the block diagrams of the 67 and 92 (I know it's a 92 and not a 97) HP Journal November 1976) you would need to exchange the firmware to be able to use the printer hardware.

Re: HP 67 printer port Message #3 Posted by Vassilis Prevelakis on 29 Nov 2004, 1:54 p.m., in response to message #2 by Karl-Ludwig Butte The PPC Journal (then called 65 Notes) had an article on how to modify an HP 65 so that it could be connected to a printer. (65 Notes, V.2 N.6, July 1975, pp 2-4) **vp

[ Return to Index | Top of Index ]

Go back to the main exhibit hall