The Museum of HP Calculators

HP Forum Archive 13

[ Return to Index | Top of Index ]

Meeting info, Allschwil
Message #1 Posted by Matthias on 12 Sept 2003, 7:40 a.m.

Last news of the meeting in Allschwil can be seen here:

http://www.hp-collection.org/meeting.htm

      
Re: Meeting info, Allschwil
Message #2 Posted by Thibaut.be on 12 Sept 2003, 9:29 a.m.,
in response to message #1 by Matthias

Thanks Matthias.

I suggest that everybody brings some specialities from his place to be shared at the meeting.

By the way I am planning my journey by car. Route is Brussels - Luxembourg - Strasbourg - Basel. I'd be glad to give a lift to anyone going to the meeting. I have up to 3 free seats in my car.

            
Re: Meeting info, Allschwil
Message #3 Posted by Mike (Stuttgart) on 12 Sept 2003, 4:13 p.m.,
in response to message #2 by Thibaut.be

I'll have to come by my own car as I have to transprort more than only some ROMs. <G>

BTW, instead of names, Matthias could have shown some URLs, just to give an idea who is who. Here is mine (not too much uptdated since long, new: about the HP200LX, alas unfinished) http://ourworld.compuserve.com/homepages/nutem/

Ha - if I see the meeting list I suppose the conference language will be French. C,a va Ítre dure.

Ciao.....Mike

                  
Re: Meeting info, Allschwil
Message #4 Posted by Museum on 12 Sept 2003, 4:36 p.m.,
in response to message #3 by Mike (Stuttgart)

I prefer swiss german for the conference language :)

(Ok, german and english is alo ok, but french? this will hard for you to listen to me that day!!)

                  
Re: Meeting info, Allschwil
Message #5 Posted by Emmanuel, France on 12 Sept 2003, 6:18 p.m.,
in response to message #3 by Mike (Stuttgart)

I think we will speak only one language: beer. ;o)

                        
Re: Meeting info, Allschwil
Message #6 Posted by Matthias on 13 Sept 2003, 2:25 a.m.,
in response to message #5 by Emmanuel, France

There is no alcohol inmy appartment :)

                              
Re: Meeting info, Allschwil
Message #7 Posted by Emmanuel, France on 13 Sept 2003, 3:25 a.m.,
in response to message #6 by Matthias

Beer w/o alcohol exists... I saw one, one time!

                              
Re: Meeting info, Allschwil
Message #8 Posted by Mike (Stgt) on 13 Sept 2003, 5:54 a.m.,
in response to message #6 by Matthias

NO ALK? Sorry, but how about shifting the meeting location to the next resaurant? There will be a free side room for us all, otherwise wee look in the near France for one. They'll take the 25 EUR too. (One beer I speek French as good as English <G>)

Ciao.....Mike

      
Thanks, Matthias! Meeting info, Allschwil
Message #9 Posted by Emmanuel, France on 12 Sept 2003, 2:42 p.m.,
in response to message #1 by Matthias

Hello everybody!

Will bring some items if interest: HP41C, HP41CV, HP48G, HP48GX, HP49G, Paname modules for HP-41, HP82162A HPIL Printer, HP82168A HPIL Acoustic Coupler, HP82169A HPIL/HPIB interface with PC ISA card, HP110 and HP-85.

Before I go to Aschwill, you can order your pre-programmed Eprom sets for HP-41 and HP-71 Eprom Box, or items below.

Thanks for interest!

            
Stuff for trade?
Message #10 Posted by Angel Martin on 13 Sept 2003, 3:43 a.m.,
in response to message #9 by Emmanuel, France

I too will bring some stuff for trade, it isn't much but somebody may be interested. Here's a partial list:-

- 10 meter HP-IL cable (or was it 5 meter?) - HP 110 laptop computer - HP-IL acoustic coupler - plain 41 Memory Modules - 41 Card Reader 1A

Best, AM

      
Re: Meeting info, Allschwil
Message #11 Posted by Mike (Stgt) on 14 Sept 2003, 11:03 a.m.,
in response to message #1 by Matthias

Hi Matthias!

Not to confuse others, but on your map north is on the RHS<G>. Eh, Emmanuel, le 200LX le montre tres bien. Tu va voir.

Ciao.....Mike

            
Re: Meeting info, Allschwil
Message #12 Posted by Emmanuel, France on 14 Sept 2003, 5:57 p.m.,
in response to message #11 by Mike (Stgt)

Dear Michael,
I know it. Mine is running inside a 48Mb Flash Disk.
Yours.
                  
Re: Meeting info, Allschwil
Message #13 Posted by Raymond Del Tondo on 14 Sept 2003, 7:40 p.m.,
in response to message #12 by Emmanuel, France

Hi Emmanuel,

did you also install Windows 3 on the 200LX ? I did, and it works quite well, even with mouse support.

Regards,

Raymond

                        
Re: Meeting info, Allschwil
Message #14 Posted by Emmanuel, France on 15 Sept 2003, 12:57 a.m.,
in response to message #13 by Raymond Del Tondo

Not yet but it could be an idea.
Ithink there's no enough memory for Win3.1
However a DOS 3.0 more than a 5.0 version could work?!
Will bring a 48Mb Flash Disk and a 512K Ram card to Allschwill (please see my list).
                  
Re: Meeting info, Allschwil
Message #15 Posted by Mike (Stgt) on 15 Sept 2003, 6:14 p.m.,
in response to message #12 by Emmanuel, France

Eh! Emmanuel!

Those photos remind me the beginning. I use a 256MB CF in my LX, I know others (in NZ <G>, hello Tony!) who use 1GB in a HP200LX. But to be honest, 48MB is not bad for the beginning.

Ciao.....Mike

                        
Re: Meeting info, Allschwil
Message #16 Posted by Daniel Diggelmann on 16 Sept 2003, 12:14 p.m.,
in response to message #15 by Mike (Stgt)

I'll bring my 200LX / 4MB RAM and second one 2MB RAM / doublespeed. A 128MB CF card is plenty of room for me... Looking forward to a 200LX session.

Cheers Daniel

                              
Re: Meeting info, Allschwil
Message #17 Posted by Matthias on 16 Sept 2003, 3:39 p.m.,
in response to message #16 by Daniel Diggelmann

I'm urgentli looking for 2-3 battery covers for my HP41... So bring them along with you to the meeting, please!

Matthias

      
Re: Meeting info, Allschwil
Message #18 Posted by Mike (Stgt) on 18 Sept 2003, 5:34 p.m.,
in response to message #1 by Matthias

I hoped you'd publish the map I prepared for the LXer.

Ciao.....Mike


[ Return to Index | Top of Index ]

Go back to the main exhibit hall