HP Forum Archive 09

[ Return to Index | Top of Index ]

HP41C Modules Locations ? Message #1 Posted by Pyerre on 20 Dec 2002, 1:14 a.m. Hello, This HP-41C came in with 4 non-installed modules : Two(2)x Memory(HP 82106A), STAT-1(HP 00041-15002), MATH-1(HP 00041-15003)... without manuals. I really don't know how to use and install them properly. Do they have to go in their specific locations or just really does not matter ? Many thanks in advance for all helps, Pyerre

Re: HP41C Modules Locations ? Message #2 Posted by Massimo Gnerucci (Italy) on 20 Dec 2002, 1:53 a.m., in response to message #1 by Pyerre Put Memory modules in slots 1 and 2, Stat and Math modules need no special arrangement. Massimo

HP41C Modules Locations general rule... Message #3 Posted by A. G. OZISIK on 29 Dec 2002, 12:41 a.m., in response to message #2 by Massimo Gnerucci (Italy) Memory modules of the 41s have to be placed always on the first available lower slots. For example, you can make; 1: memory, 2: memory, 3: stat, 4:math or 1: memory, 2: memory, 3:math, 4: stat, But never; 1: memory, 2:math, 3: stat, 4: memory, or 1:math, 2: stat, 3: memory, 4: memory,

Re: HP41C Modules Locations more general rule...;-) Message #4 Posted by Raymond Hellstern (Germany) on 30 Dec 2002, 5:27 p.m., in response to message #3 by A. G. OZISIK Hi, simply don't put an XMem in the physical port above (or below) the other... Raymond

Re: HP41C Modules Locations ? Message #5 Posted by Vieira, Luiz C. (Brazil) on 29 Dec 2002, 10:16 a.m., in response to message #1 by Pyerre Hi; about the manuals. Have you loocked here? If you are using these modules' features, you need their manual for detailed and efficient results. Cheers.

[ Return to Index | Top of Index ]

Go back to the main exhibit hall