HP Forum Archive 01

[ Return to Index | Top of Index ]

HP49G Plot Windows Message #1 Posted by Michael Robbins on 3 Sept 1999, 11:27 a.m. I received the 49G and I'm having a problem getting the 'Plot Window' to open up using the "left-arrow" "WIN" command or the "left-arrow" "2D/3D" command. It doesn't do anything. The manual included doesn't explain what to do. Thanks for the help, Michael Robbins

Re: HP49G Plot Windows Message #2 Posted by Michael Robbins on 9 Sept 1999, 2:16 a.m., in response to message #1 by Michael Robbins The calculator needs to be in Algebraic Mode for Plotting according to HP. Also, when doing 'units' conversions, the calculator must have 'Flag 117' set to 'Soft Keys'. (Go to Modes:Flag:check flag 117:Set to 'Soft Keys'.) Thank God for technical support. Mike

Re: HP49G Plot Windows Message #3 Posted by Mark Hardman on 9 Sept 1999, 4:32 p.m., in response to message #1 by Michael Robbins If the HP-49G is in RPN mode, you can still access the Y=, WIN, GRAPH and 2D/3D commands. To do this, pres and HOLD the left arrow key while you press the desired Plot function key. Hope this helps.

[ Return to Index | Top of Index ]

Go back to the main exhibit hall