Post Reply 
So, I bought a 41CV
01-21-2018, 04:47 AM
Post: #21
RE: So, I bought a 41CV
(01-21-2018 01:58 AM)hth Wrote:  [quote='Maximilian Hohmann' pid='89187' dateline='1516478641']
I think the HP-41 runs about 10-15% faster than the 15C in raw performance. Probably noticeable when compared next to each other, but hardly any huge difference.

IIRC, the 15c took 40 seconds to invert an 8x8 real matrix, and the 41 with the Advantage module took 20, the HP-71 with Math module took 3 or 3.5 seconds, and the 50g had no visible delay. I tried it on the TI-59 with the stock library module, and after 15 minutes I gave up and turned it off.

http://WilsonMinesCo.com (Lots of HP-41 links at the bottom of the links page, http://wilsonminesco.com/links.html )
Visit this user's website Find all posts by this user
Quote this message in a reply
01-21-2018, 05:35 AM
Post: #22
RE: So, I bought a 41CV
(01-21-2018 04:47 AM)Garth Wilson Wrote:  
(01-21-2018 01:58 AM)hth Wrote:  [quote='Maximilian Hohmann' pid='89187' dateline='1516478641']
I think the HP-41 runs about 10-15% faster than the 15C in raw performance. Probably noticeable when compared next to each other, but hardly any huge difference.

IIRC, the 15c took 40 seconds to invert an 8x8 real matrix, and the 41 with the Advantage module took 20, the HP-71 with Math module took 3 or 3.5 seconds, and the 50g had no visible delay. I tried it on the TI-59 with the stock library module, and after 15 minutes I gave up and turned it off.

I stand corrected.

I judged it from memory and looking into it now, the HP-41 can really be twice as fast.

Wow, it makes me even more impressed by the HP-16C, which currently outperforms my Ladybug ROM in some cases, though there are cases where the opposite it true. On the HP-41 side I have the benefit of more raw CPU power, but is hampered by the overhead of the more flexible (complicated) operating system and memory system.

A challenge to tend to at some point...

Håkan
Find all posts by this user
Quote this message in a reply
01-21-2018, 08:38 AM (This post was last modified: 01-21-2018 08:38 AM by aurelio.)
Post: #23
RE: So, I bought a 41CV
(01-21-2018 02:53 AM)Joe Horn Wrote:  Don't forget the Topcat series, which are also pocket calculators (for sufficiently large pockets).
and sufficiently "deep" pockets as written in a previous post Smile
Find all posts by this user
Quote this message in a reply
01-21-2018, 12:07 PM (This post was last modified: 01-21-2018 12:12 PM by TheKaneB.)
Post: #24
RE: So, I bought a 41CV
Will the Time module let me go back in time and have my money back? Big Grin

Anyway, for me the speed is somewhat important, because I like to experiment with programming a lot, so if I have quicker results it means that I can do more experiments in the same timespan.
However speed for me is very low in my priority list, (in order: keyboard quality, display, keyboard layout, user interface, number of functions, programming constructs, and then speed)

Software Failure: Guru Meditation

--
Antonio
IU2KIY
Find all posts by this user
Quote this message in a reply
01-21-2018, 12:28 PM (This post was last modified: 01-21-2018 12:29 PM by Massimo Gnerucci.)
Post: #25
RE: So, I bought a 41CV
(01-21-2018 02:53 AM)Joe Horn Wrote:  
(01-21-2018 02:36 AM)Massimo Gnerucci Wrote:  Yep!
The only calculator with labels below the key: that's enough to confuse me each time I grab one.

Don't forget the Topcat series, which are also pocket calculators (for sufficiently large pockets).

[Image: topcat.jpg]

Topcats are really nice, indeed. But I still can't find sufficiently large pockets...

They have that nice handbag, though! :)

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
02-01-2018, 05:22 PM (This post was last modified: 02-01-2018 05:25 PM by TheKaneB.)
Post: #26
RE: So, I bought a 41CV
Finally!!!
   

Software Failure: Guru Meditation

--
Antonio
IU2KIY
Find all posts by this user
Quote this message in a reply
02-01-2018, 05:33 PM
Post: #27
RE: So, I bought a 41CV
decoding the serial number it appears to be an early 1988 model, it's in perfect shape, with very few marks and the keyboard is just a joy. For some reason I was expecting a stiffer key action, but I'm pleased to learn otherwise. The display looks in perfect conditions, and overall I'm really excited to study it in detail in the following weeks Smile

Software Failure: Guru Meditation

--
Antonio
IU2KIY
Find all posts by this user
Quote this message in a reply
02-01-2018, 06:13 PM
Post: #28
RE: So, I bought a 41CV
(02-01-2018 05:33 PM)TheKaneB Wrote:  ...The display looks in perfect conditions, and overall I'm really excited to study it in detail in the following weeks Smile

happy!
enjoy it, Antonio.

;-)

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
02-01-2018, 10:50 PM
Post: #29
RE: So, I bought a 41CV
Hi Mike!

Thank you, but I'll try to resist the urge to read your code, since I wanted to implement it myself first Big Grin

When I'm happy with the result, I'll compare my code with yours to learn more advanced techniques Smile

Software Failure: Guru Meditation

--
Antonio
IU2KIY
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)