Post Reply 
DM42 available for order!!!
12-18-2017, 07:40 PM
Post: #1
DM42 available for order!!!
Just checked the Swiss Micro web site and saw that Michael was taking order. SO I ordered one. Came to above USD 200 with shipping. Not cheap, but certainly worth it.

ANyone else ordered it?

Merry Christmas to all!

Namir
Find all posts by this user
Quote this message in a reply
12-18-2017, 07:46 PM
Post: #2
RE: DM42 available for order!!!
Sorry to break it to you, but you're a bit late to the party Smile
http://www.hpmuseum.org/forum/thread-7457-page-12.html
Find all posts by this user
Quote this message in a reply
12-18-2017, 08:32 PM
Post: #3
RE: DM42 available for order!!!
(12-18-2017 07:40 PM)Namir Wrote:  Just checked the Swiss Micro web site and saw that Michael was taking order. SO I ordered one. Came to above USD 200 with shipping. Not cheap, but certainly worth it.

ANyone else ordered it?

Merry Christmas to all!

Namir

Where have you been Namir? ;)

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
12-18-2017, 08:35 PM
Post: #4
RE: DM42 available for order!!!
(12-18-2017 07:46 PM)Logan Wrote:  Sorry to break it to you, but you're a bit late to the party Smile
http://www.hpmuseum.org/forum/thread-7457-page-12.html

I am a few days late ... not a terrible delay.

Namir
Find all posts by this user
Quote this message in a reply
12-18-2017, 09:11 PM
Post: #5
RE: DM42 available for order!!!
Well, even though I signed up for the e-mail announcement of the DM-42 availability, I never got it. So, don't feel bad Namir! Big Grin

smp
Find all posts by this user
Quote this message in a reply
12-18-2017, 09:55 PM
Post: #6
RE: DM42 available for order!!!
(12-18-2017 09:11 PM)smp Wrote:  Well, even though I signed up for the e-mail announcement of the DM-42 availability, I never got it.

Never got it also... waiting... Smile

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
12-19-2017, 11:15 AM
Post: #7
RE: DM42 available for order!!!
I asked Michael about the notification e-mails and why some people didn't receive them.

The reason for this is because there were some 700 people who signed up for the notification. DM42s are being produced at a rate slower than Michael would like but it is what it is. He's basically assembling them on his own. People are being informed by e-mail on a first-come-first-served basis.

So, with the first 100 units on the shelf, the first 100 people to sign up to the notification were, well... notified. With the next 100 units, the next 100 people were notified etc...
Find all posts by this user
Quote this message in a reply
12-19-2017, 11:22 AM
Post: #8
RE: DM42 available for order!!!
(12-19-2017 11:15 AM)grsbanks Wrote:  I asked Michael about the notification e-mails and why some people didn't receive them.

The reason for this is because there were some 700 people who signed up for the notification. DM42s are being produced at a rate slower than Michael would like but it is what it is. He's basically assembling them on his own. People are being informed by e-mail on a first-come-first-served basis.

So, with the first 100 units on the shelf, the first 100 people to sign up to the notification were, well... notified. With the next 100 units, the next 100 people were notified etc...

Well, thank you for info!

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
12-19-2017, 03:28 PM
Post: #9
RE: DM42 available for order!!!
(12-19-2017 11:15 AM)grsbanks Wrote:  I asked Michael about the notification e-mails and why some people didn't receive them.

The reason for this is because there were some 700 people who signed up for the notification. DM42s are being produced at a rate slower than Michael would like but it is what it is. He's basically assembling them on his own. People are being informed by e-mail on a first-come-first-served basis.

So, with the first 100 units on the shelf, the first 100 people to sign up to the notification were, well... notified. With the next 100 units, the next 100 people were notified etc...

Thanks very much for this explanation! I was disappointed, but now I can feel much better about Swiss Micro, and their follow-through on their messaging.

smp
Find all posts by this user
Quote this message in a reply
12-19-2017, 03:48 PM
Post: #10
RE: DM42 available for order!!!
Hello Co-calc-lovers, I also didn't got my mail (yet), but I was wondering how those lucky ones placed their order since I don't see the DM42 on the order-page of SM. (By the way, what would be its price in EUR? About 170 € I suppose?)
Find all posts by this user
Quote this message in a reply
12-19-2017, 03:50 PM
Post: #11
RE: DM42 available for order!!!
https://www.swissmicros.com/order.php

First item on the list. And yes, about 170 €.
Find all posts by this user
Quote this message in a reply
12-19-2017, 03:55 PM
Post: #12
RE: DM42 available for order!!!
(12-19-2017 03:48 PM)ArneStolti Wrote:  Hello Co-calc-lovers, I also didn't got my mail (yet), but I was wondering how those lucky ones placed their order since I don't see the DM42 on the order-page of SM. (By the way, what would be its price in EUR? About 170 € I suppose?)

The SM order page at https://www.swissmicros.com/order.php shows the DM42 available for purchase at ~ 170 €. Try clearing your browser cache or try a different browser.

HTH

Mark Hardman

Ceci n'est pas une signature.
Find all posts by this user
Quote this message in a reply
12-19-2017, 04:00 PM
Post: #13
RE: DM42 available for order!!!
(12-18-2017 07:40 PM)Namir Wrote:  Just checked the Swiss Micro web site and saw that Michael was taking order. SO I ordered one. Came to above USD 200 with shipping. Not cheap, but certainly worth it.

ANyone else ordered it?

Merry Christmas to all!

Namir

I received mine in the USA yesterday. It has a good, solid feel to it. I haven't used it extensively yet to check my unit but am rather disturbed by the number of reports of keys not registering properly. Given previous experience with D & M at SwissMicros, I'm confident that any problems will be resolved to the satisfaction of buyers.

Tom L
Cui bono?
Find all posts by this user
Quote this message in a reply
12-19-2017, 04:22 PM
Post: #14
RE: DM42 available for order!!!
(12-19-2017 04:00 PM)toml_12953 Wrote:  I received mine in the USA yesterday. It has a good, solid feel to it. I haven't used it extensively yet to check my unit but am rather disturbed by the number of reports of keys not registering properly. Given previous experience with D & M at SwissMicros, I'm confident that any problems will be resolved to the satisfaction of buyers.

I was having a little trouble with 2 and + being a little bit less responsive than other keys, so I very carefully peeled up the keyboard layer and cleaned out the domes and contacts a bit. They seem fine now.

I am noticing a decent amount of key bounce - nowhere near what you'd get on a 49G with KEYTIME set to 0, but it's there. Hopefully a future firmware update adds some configurable software debouncing.
Visit this user's website Find all posts by this user
Quote this message in a reply
12-19-2017, 06:26 PM
Post: #15
RE: DM42 available for order!!!
(12-19-2017 04:22 PM)Dave Britten Wrote:  I was having a little trouble with 2 and + being a little bit less responsive than other keys, so I very carefully peeled up the keyboard layer and cleaned out the domes and contacts a bit. They seem fine now.

I am noticing a decent amount of key bounce - nowhere near what you'd get on a 49G with KEYTIME set to 0, but it's there. Hopefully a future firmware update adds some configurable software debouncing.

Funny, I've owned a beta unit for the last 6 months and there has been no bouncing to speak of...
Find all posts by this user
Quote this message in a reply
12-19-2017, 06:31 PM
Post: #16
RE: DM42 available for order!!!
I've experienced a little bounce too several times but part of it could be me not being used to how hard I need to press.
Find all posts by this user
Quote this message in a reply
12-19-2017, 06:36 PM
Post: #17
RE: DM42 available for order!!!
(12-19-2017 11:15 AM)grsbanks Wrote:  I asked Michael about the notification e-mails and why some people didn't receive them.

The reason for this is because there were some 700 people who signed up for the notification. DM42s are being produced at a rate slower than Michael would like but it is what it is. He's basically assembling them on his own. People are being informed by e-mail on a first-come-first-served basis.

So, with the first 100 units on the shelf, the first 100 people to sign up to the notification were, well... notified. With the next 100 units, the next 100 people were notified etc...

makes sense.

I checked here since I didn't get an email. Ordered last week and it came yesterday.
Very fast.
Find all posts by this user
Quote this message in a reply
12-20-2017, 06:23 AM
Post: #18
RE: DM42 available for order!!!
(12-19-2017 06:31 PM)Logan Wrote:  I've experienced a little bounce too several times but part of it could be me not being used to how hard I need to press.

Go into SETUP, 3. Settings and select 5. Slow Auto-repeat. This solved the bounce problem with hard buttons for me.
Find all posts by this user
Quote this message in a reply
12-20-2017, 02:12 PM
Post: #19
RE: DM42 available for order!!!
Thanks, I'll try that for a bit (though I did enjoy the fast scrolling in programs!)
Find all posts by this user
Quote this message in a reply
12-22-2017, 01:47 PM (This post was last modified: 12-22-2017 01:48 PM by jebem.)
Post: #20
RE: DM42 available for order!!!
Apparently it is not possible to place orders anymore, by using their portal order page:
When you type in anumber higher than zero in the Qty field, the message is:
"DM42 limited stock...qty changed.
For preorders please contact michael@swissmicros.com by emai
l"

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)