User guide (english) page 578

[DrD]

This may have been reported already: the AAngle modes are shown as:

0 - System (default)
1 - Degrees (Should be Radians)
2 - Radians (Should be Degrees)

Modes 1 and 2 are reversed from the actual modes.
To select a mode enter (either home or CAS view, or via ppl):

AAngle:=1, (The upper right icon will display angle mode for radians).
AAngle:=2, (The upper right icon will display angle mode for degrees).


-Dale-

[Tim Wessman]

I think it has, but I'll check. Thanks!