Post Reply 
DM42
05-14-2016, 03:37 PM
Post: #21
RE: DM42
I need it to print and time keep! The time keep is a modification definitely but the IR printing is not.

Any comments on the ability to print and time keep with alarm?

Nice job!

Geoff
Find all posts by this user
Quote this message in a reply
05-14-2016, 03:52 PM
Post: #22
RE: DM42
(05-14-2016 09:38 AM)Massimo Gnerucci Wrote:  Just found this on Facebook...

:-)

Thanks Massimo for sharing this great news!

A really good reason to use Facebook at last....

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
05-14-2016, 04:12 PM
Post: #23
RE: DM42
(05-14-2016 03:02 PM)Massimo Gnerucci Wrote:  
(05-14-2016 02:32 PM)Jlouis Wrote:  I hope there is still a landscape DM42...it is like take a candy from a child's mouth...

My turn now! Tongue

Smile Smile Smile

Sad Sad Sad
Find all posts by this user
Quote this message in a reply
05-14-2016, 06:05 PM
Post: #24
RE: DM42
Oh my, sweet. This is what HP35s should have been. Smile
Find all posts by this user
Quote this message in a reply
05-14-2016, 08:20 PM
Post: #25
RE: DM42
(05-14-2016 03:37 PM)Geoff Quickfall Wrote:  I need it to print and time keep! The time keep is a modification definitely but the IR printing is not.

Any comments on the ability to print and time keep with alarm?

Nice job!

Geoff

Geoff, here's the reply:

Quote:of course it'll have an RTC to keep time. I haven't yet decided about an IR port. An optional BLE module would be nice too...

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
05-14-2016, 09:02 PM
Post: #26
RE: DM42
One CR2032 and USB power-able.

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
05-14-2016, 09:29 PM
Post: #27
RE: DM42
About the CPU and microSD support:

Quote:The new CPU has 128kB RAM, 1MB flash and it does some more tricks. Then there are another 4MB flash on board, and a card slot for microSD cards which is only available if USB is connected because they are potential vampires.

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
05-14-2016, 09:58 PM
Post: #28
RE: DM42
This sounds like a very interesting Allschwil meeting in October. I hope Michael will be there again.

Günter
Find all posts by this user
Quote this message in a reply
05-14-2016, 11:03 PM
Post: #29
RE: DM42
(05-14-2016 09:29 PM)Massimo Gnerucci Wrote:  About the CPU and microSD support:

Quote:The new CPU has 128kB RAM, 1MB flash and it does some more tricks. Then there are another 4MB flash on board, and a card slot for microSD cards which is only available if USB is connected because they are potential vampires.

What about speed? Will it be slow like the DM41?

Jean-Charles
Find all posts by this user
Quote this message in a reply
05-15-2016, 06:54 AM
Post: #30
RE: DM42
Interesting images. Looks like a nice calculator.
I suspect I'll get one when it is available...

I quite like the 42S and the screen looks like it will display more than just X and Y.


Pauli
Find all posts by this user
Quote this message in a reply
05-15-2016, 07:48 AM
Post: #31
RE: DM42
(05-14-2016 06:05 PM)Vtile Wrote:  Oh my, sweet. This is what HP35s should have been. Smile
No, the 35s was meant to continue the 3x lineage, and functionality-wise the HP calculator group came up with a great design.
Find all posts by this user
Quote this message in a reply
05-15-2016, 01:29 PM
Post: #32
RE: DM42
(05-15-2016 07:48 AM)Thomas Radtke Wrote:  
(05-14-2016 06:05 PM)Vtile Wrote:  Oh my, sweet. This is what HP35s should have been. Smile
No, the 35s was meant to continue the 3x lineage, and functionality-wise the HP calculator group came up with a great design.

[Oftopic] Well yeah, that is what number tolds, but we are living at 21st century so alphanumeric variables and softmenus (among others) isn't too much to ask for even simple and small programmable scientific[/Oftopic]
Find all posts by this user
Quote this message in a reply
05-15-2016, 02:17 PM
Post: #33
RE: DM42
(05-15-2016 01:29 PM)Vtile Wrote:  [Oftopic] Well yeah, that is what number tolds, but we are living at 21st century so alphanumeric variables and softmenus (among others) isn't too much to ask for even simple and small programmable scientific[/Oftopic]
The 35s does have alphanumeric variables. The fact that they are single-letter variables makes accessing them especially easy despite their limitations. But this is (or would have been if bug-free) a calculator shining on the more simpler operations, with enough power to write quite some complex programs. It can easily exist beside a 42S, and actually did so for some time.

And no, it is not just the number. There is a very clear line from the 32S (and maybe earlier calculators) up to the 35s.
Find all posts by this user
Quote this message in a reply
05-15-2016, 04:21 PM (This post was last modified: 05-15-2016 04:22 PM by Massimo Gnerucci.)
Post: #34
RE: DM42
Alternate keyboard layout:

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
05-15-2016, 04:29 PM
Post: #35
RE: DM42
Thanks Massimo,

Looking forward to the finished product.

Geoff
Find all posts by this user
Quote this message in a reply
05-15-2016, 05:29 PM
Post: #36
RE: DM42
(05-15-2016 02:17 PM)Thomas Radtke Wrote:  
(05-15-2016 01:29 PM)Vtile Wrote:  [Oftopic] Well yeah, that is what number tolds, but we are living at 21st century so alphanumeric variables and softmenus (among others) isn't too much to ask for even simple and small programmable scientific[/Oftopic]
The 35s does have alphanumeric variables. The fact that they are single-letter variables makes accessing them especially easy despite their limitations. But this is (or would have been if bug-free) a calculator shining on the more simpler operations, with enough power to write quite some complex programs. It can easily exist beside a 42S, and actually did so for some time.

And no, it is not just the number. There is a very clear line from the 32S (and maybe earlier calculators) up to the 35s.

Your opinion is as good as mine.
Find all posts by this user
Quote this message in a reply
05-16-2016, 06:58 AM
Post: #37
RE: DM42
(05-15-2016 06:54 AM)Paul Dale Wrote:  I quite like the 42S and the screen looks like it will display more than just X and Y.

This looks interesting, as if it will display all four stack levels and softkey menus. (Presumably not graphics, though...?) The form factor, however, is starting to look like an HP48, which feels like it's a bit big for purpose. If I had my druthers it would have a smaller, true-to-history size display, but at least big enough so that the digits could be easily read by old gits like me. But it does look good....
Find all posts by this user
Quote this message in a reply
05-16-2016, 02:50 PM
Post: #38
RE: DM42
(05-16-2016 06:58 AM)JimP Wrote:  The form factor, however, is starting to look like an HP48, which feels like it's a bit big for purpose.

If you read details above (and/or print the attached images) you'll find this new machine is actually a bit smaller than the original Pioneer machines. So it's very portable, but with a much larger screen, which can display all 4 levels plus the soft-menus. I have no inside information, but it's fully obvious that to act as a '42, it must include the soft-menus, and they surely would not display only 3 levels.

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
05-16-2016, 08:42 PM
Post: #39
RE: DM42
As Michael stated on youtube, alternatives firmwares will be available wich may include graphics.

And the landscape DM42 is not dead... Smile
Find all posts by this user
Quote this message in a reply
05-16-2016, 09:00 PM
Post: #40
RE: DM42
(05-16-2016 08:42 PM)Jlouis Wrote:  And the landscape DM42 is not dead... Smile

This is really a pity: why waste resources on lesser formats?

Tongue

Wink

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 3 Guest(s)