Post Reply 
HP-25C Eumulator
10-14-2015, 09:58 AM
Post: #261
RE: HP-25C Eumulator
Hi Patryk:
Yes the micro is preprogrammed and I've soldered the battery holder down to the pc board. Kits are $33.00USD each and assembled NP25's are $40.00USD each. Shipping inside the U.S. is an additional $3.00/ shipping outside the U.S. is $8.00. I'll send you an private message, once the kit is ready to ship so you can provide payment and your address.
Cheers....Jim J.

(10-14-2015 03:18 AM)patryk Wrote:  Hi Jim, I'd love to get my hands on a kit. Just one question: does the chip come preprogrammed?
Find all posts by this user
Quote this message in a reply
10-15-2015, 08:40 PM
Post: #262
RE: HP-25C Eumulator
Jim,

That sounds great. One kit for me it is.
And not to be a cheapskate, but just a few days ago you said kits are $30? Is that $33 with shipping to US? Thanks.
Find all posts by this user
Quote this message in a reply
10-15-2015, 08:49 PM
Post: #263
RE: HP-25C Eumulator
Hi Patryk. Oops. You're not a cheapskate at all. I just made an error. You're correct, the kits are $30.00 USD, plus $3.00 shipping inside the U.S. Total cost is $33.00 for kit and shipping inside the U.S.

I've got you down for one (1) kit. I'm waiting on some switches to come in to complete the next batch of NP25's. I'll let you know as soon as they come in.
Cheers! Jim J.

(10-15-2015 08:40 PM)patryk Wrote:  Jim,

That sounds great. One kit for me it is.
And not to be a cheapskate, but just a few days ago you said kits are $30? Is that $33 with shipping to US? Thanks.
Find all posts by this user
Quote this message in a reply
10-23-2015, 01:21 PM
Post: #264
RE: HP-25C Eumulator
The rest of the parts just arrived to complete the NP25 kits and assembled units. I'll send a pm to those who have ordered NP25 kits or assembled units and I'll be shipping out NP25 calculators in the next few days.

(strike-thru for shipped units)
V3B1.1 batch list. Expect shipping now:
David Hayden x1, kevinslx1, nparlante x2(k), kinma x1, Patryk x1(k), jwshu x1(k) (7 units total)
Find all posts by this user
Quote this message in a reply
10-27-2015, 01:07 PM
Post: #265
RE: HP-25C Eumulator
Shipped out NP25 calculators shown as strike-thru below. More pcb's coming. SparkFun has run out of the QDSP-6064 LED displays. I recently purchased over 100 pcs, but cannot find this "new old stock" of LED displays anywhere else. I have enough displays to still build a few NP25's.

(strike-thru for shipped units)
V3B1.1 batch list. Shipping now:
David Hayden x1, kevinslx1, nparlante x2(k), kinma x1, Patryk x1(k), jwshu x1(k) (7 units total)
[/quote]


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
10-27-2015, 02:57 PM (This post was last modified: 10-27-2015 03:17 PM by Harald.)
Post: #266
RE: HP-25C Eumulator
(10-27-2015 01:07 PM)jjohnson873 Wrote:  SparkFun has run out of the QDSP-6064 LED displays. I recently purchased over 100 pcs, but cannot find this "new old stock" of LED displays anywhere else.

http://www.exp-tech.de/bubble-display-7-segment-4-digit

Weren't there a couple of thousand left at Sparkfun a while ago? And were they not a lot cheaper to start with?
Find all posts by this user
Quote this message in a reply
10-27-2015, 04:56 PM
Post: #267
RE: HP-25C Eumulator
Harald....yes, SparkFun had over 4,000 pieces at one time at $2.95 ea. USD, but they sold all of them. I purchased some of the last of the SparkFun stock when the inventory dropped below 200 pieces. The SparkFun U.S. site now lists the QDSP-6064 as "retired". Seems as if there are 298 pieces of the QDSP-6064 in a different SparkFun location (Germany). 2,95 Euro is around $3.26 USD, without shipping included. I'm concerned about increasing prices if the supply of this part is truly constrained.

(10-27-2015 02:57 PM)Harald Wrote:  
(10-27-2015 01:07 PM)jjohnson873 Wrote:  SparkFun has run out of the QDSP-6064 LED displays. I recently purchased over 100 pcs, but cannot find this "new old stock" of LED displays anywhere else.

http://www.exp-tech.de/bubble-display-7-segment-4-digit

Weren't there a couple of thousand left at Sparkfun a while ago? And were they not a lot cheaper to start with?
Find all posts by this user
Quote this message in a reply
10-27-2015, 09:17 PM
Post: #268
RE: HP-25C Eumulator
(10-27-2015 04:56 PM)jjohnson873 Wrote:  I'm concerned about increasing prices if the supply of this part is truly constrained.

Well, I guess there will be an end to the NP25 soon (unless someone finds a few more of these modules in a forgotten warehouse). I hope you haven't ordered huge amounts of other components?!

Hopefully we can move on to the NP41 soon Smile
Find all posts by this user
Quote this message in a reply
10-28-2015, 03:16 AM
Post: #269
RE: HP-25C Eumulator
I still use an HP25c regularly and would very much like a kit to build. What do I have to do to get one? Thanks!
Find all posts by this user
Quote this message in a reply
10-28-2015, 04:16 AM
Post: #270
RE: HP-25C Eumulator
(10-28-2015 03:16 AM)boolean3d Wrote:  I still use an HP25c regularly and would very much like a kit to build. What do I have to do to get one? Thanks!

Please send payment via PayPal for the total to the email address that I will PM to you. Please include shipping in the payment (see shipping charges below).

. assembled units are US$40, kits are US$30. Remember all prices are in U.S. dollars.
. shipping for U.S. is $3, USD, rest of the world is $8.00 USD.
. enter your shipping name and address via PayPal.

* I will acknowledge with a post in this thread instead of replying individual PMs / emails.
Find all posts by this user
Quote this message in a reply
10-28-2015, 06:31 AM
Post: #271
RE: HP-25C Eumulator
(10-27-2015 02:57 PM)Harald Wrote:  
(10-27-2015 01:07 PM)jjohnson873 Wrote:  SparkFun has run out of the QDSP-6064 LED displays. I recently purchased over 100 pcs, but cannot find this "new old stock" of LED displays anywhere else.

http://www.exp-tech.de/bubble-display-7-segment-4-digit

Thank you for sharing that German supplier, Harald.

I have just placed on small order of just 3 units to have some spare parts for my NP-25 unit.

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
10-30-2015, 03:22 AM
Post: #272
RE: HP-25C Eumulator
I just finished putting my NP-25 kit together and it worked fine from the start. I wish I could say the same for myself thought - I thought I had some a bad solder until I changed ROM modes to the 25C ROM and realized that the keys were all working correctly.

For me, the keys were the hardest part. I had to bend the pins slightly for them to fix in the holes. Even then I had to solder from the front because they'd fall out otherwise.

This is a wonderful little project and I thank Jim and Chris for all their hard work putting this together. I will probably hang it with my badge as a conversation piece.
Find all posts by this user
Quote this message in a reply
11-01-2015, 06:30 AM
Post: #273
RE: HP-25C Eumulator
(10-27-2015 09:17 PM)Harald Wrote:  Well, I guess there will be an end to the NP25 soon (unless someone finds a few more of these modules in a forgotten warehouse).

would it be heresy to suggest using a non-hp part, or even producing a firmware version that uses a 16x1 LCD dotmatrix module?

cheers,
rob :-)
Find all posts by this user
Quote this message in a reply
11-01-2015, 06:46 AM
Post: #274
RE: HP-25C Eumulator
Why dot matrix? 7-segment would suffice ..

d:-?
Find all posts by this user
Quote this message in a reply
11-01-2015, 07:23 AM
Post: #275
RE: HP-25C Eumulator
(11-01-2015 06:46 AM)walter b Wrote:  Why dot matrix? 7-segment would suffice ..

cheapness, easily obtained, allows for the decimal point (or comma) to occupy a character position (hp35-style). plus the future option of extending the emulation layer to decode keycode numbers into alpha opcodes when viewing a program listing.

cheers,
rob :-)
Find all posts by this user
Quote this message in a reply
11-01-2015, 08:19 AM
Post: #276
RE: HP-25C Eumulator
Well, well, but the poor little processor ....

d:-?
Find all posts by this user
Quote this message in a reply
11-01-2015, 10:47 AM
Post: #277
RE: HP-25C Eumulator
(11-01-2015 08:19 AM)walter b Wrote:  Well, well, but the poor little processor ....

well, there are a few alternative processors out there that would be up to the task. my preference would be a PIC32MX170, that has 256k of flash to play with and can draw just a couple of mA when running at a low clock rate. less than 100uA in standby.

cheers,
rob :-)
Find all posts by this user
Quote this message in a reply
11-01-2015, 11:50 AM
Post: #278
RE: HP-25C Eumulator
Shipping completed on last batch of NP25 calculators shown as strike-thru below. Just received more PCB's from China. Waiting on some more pushbuttons. I have enough QDSP-6064 displays to build around 40 NP25's. If anyone is interested, can ship kits or assembled units mid-Nov.

(strike-thru for shipped units)
V3B1.1 batch list. Shipping completed on last orders:
David Hayden x1, kevinslx1, nparlante x2(k), kinma x1, Patryk x1(k), jwshu x1(k) (7 units total)
Find all posts by this user
Quote this message in a reply
11-03-2015, 10:30 AM (This post was last modified: 11-03-2015 10:32 AM by jebem.)
Post: #279
RE: HP-25C Eumulator
(10-28-2015 06:31 AM)jebem Wrote:  
(10-27-2015 02:57 PM)Harald Wrote:  http://www.exp-tech.de/bubble-display-7-segment-4-digit
I have just placed on small order of just 3 units to have some spare parts for my NP-25 unit.

Just received my package with a bunch of Sparkfun HP QDSP-6064 Bubble Displays Smile
Shipped on 28-10 from Germany, received on 3-11 in Portugal, via DHL carrier, a very fast delivery for sure.

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
11-05-2015, 09:39 PM
Post: #280
RE: HP-25C Eumulator
(11-01-2015 11:50 AM)jjohnson873 Wrote:  Shipping completed on last batch of NP25 calculators shown as strike-thru below. Just received more PCB's from China. Waiting on some more pushbuttons. I have enough QDSP-6064 displays to build around 40 NP25's. If anyone is interested, can ship kits or assembled units mid-Nov.

Jim, I would like one, assembled, please. Let me know the details you need by PM.

Thanks

-Jonathan
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)