Post Reply 
HP-97 Card Reader install tool
12-03-2021, 08:34 AM
Post: #1
HP-97 Card Reader install tool
Hi All,

I recently revised an HP-97 and before removing the card reader I took a few measurements and designed an install tool so that when I was going to re-assemble it would be in the right position.

Should you need something similar and have a 3D printer available please have a look here: https://www.thingiverse.com/thing:5153770/files

   

Regards,
Bas

35 | 45 | 55 | 65 | 10 | 19C | 21 | 25 | 29C | 34E Ir | 41C | 33E | 33C | 34C | 67 | 41CV | 41CX | 71B | 75B | 10C | 11C | 12C | 15C | 16C | 41CL | DM41X | DM16L
Find all posts by this user
Quote this message in a reply
12-03-2021, 11:33 PM
Post: #2
RE: HP-97 Card Reader install tool
Thanks - this is super useful!

I'm printing one tonight.

Regards,

Dave
Visit this user's website Find all posts by this user
Quote this message in a reply
12-04-2021, 12:21 AM
Post: #3
RE: HP-97 Card Reader install tool
For those without a 3D printer, match marking the three screw positions on the base of the card reader with a paint marker and returning the reader to the same position works every time ;-)
Find all posts by this user
Quote this message in a reply
12-04-2021, 01:39 AM
Post: #4
RE: HP-97 Card Reader install tool
Also, from what I have seen the screws leave an indent in the plastic so is easy to refit.

The tool is nice however.

cheers

Tony
Find all posts by this user
Quote this message in a reply
12-04-2021, 05:01 AM
Post: #5
RE: HP-97 Card Reader install tool
Hi Dave,

Let me know if it works for you, so I can adjust the design if needed.

Regards,
Bas
(12-03-2021 11:33 PM)Dreato Wrote:  Thanks - this is super useful!

I'm printing one tonight.

Regards,

Dave

35 | 45 | 55 | 65 | 10 | 19C | 21 | 25 | 29C | 34E Ir | 41C | 33E | 33C | 34C | 67 | 41CV | 41CX | 71B | 75B | 10C | 11C | 12C | 15C | 16C | 41CL | DM41X | DM16L
Find all posts by this user
Quote this message in a reply
12-04-2021, 05:04 AM
Post: #6
RE: HP-97 Card Reader install tool
Yes, that's what I should have done on the first HP-97 that I disassembled :-)
(12-04-2021 12:21 AM)GreyUser Wrote:  For those without a 3D printer, match marking the three screw positions on the base of the card reader with a paint marker and returning the reader to the same position works every time ;-)

35 | 45 | 55 | 65 | 10 | 19C | 21 | 25 | 29C | 34E Ir | 41C | 33E | 33C | 34C | 67 | 41CV | 41CX | 71B | 75B | 10C | 11C | 12C | 15C | 16C | 41CL | DM41X | DM16L
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)