Post Reply 
FIX_ _ on HP41 (fixed point display)
05-09-2021, 05:13 PM (This post was last modified: 05-09-2021 05:17 PM by aurelio.)
Post: #1
FIX_ _ on HP41 (fixed point display)
Sorry for the trivial question,
On the HP41 the function FIX when used prompts you for a single digit (from 0 to 9), but I've noticed that in a particular configuration prompts instead for two digits (_ _), this is sure due to the modules loaded, but why ?
Find all posts by this user
Quote this message in a reply
05-09-2021, 06:53 PM
Post: #2
RE: FIX_ _ on HP41 (fixed point display)
The ZENROM and maybe others let you do FIX 10.

http://WilsonMinesCo.com (Lots of HP-41 links at the bottom of the links page, http://wilsonminesco.com/links.html )
Visit this user's website Find all posts by this user
Quote this message in a reply
05-09-2021, 08:58 PM (This post was last modified: 05-09-2021 09:00 PM by aurelio.)
Post: #3
RE: FIX_ _ on HP41 (fixed point display)
Thank-you Garth, and sorry for my bad english, I realize now a mistake in the question....it should be "which" (modules) and not "why"..., but you understood..

So maybe the ZENROM is not the one which allows FIX10...
Find all posts by this user
Quote this message in a reply
05-10-2021, 06:32 AM
Post: #4
RE: FIX_ _ on HP41 (fixed point display)
(05-09-2021 05:13 PM)aurelio Wrote:  Sorry for the trivial question,
On the HP41 the function FIX when used prompts you for a single digit (from 0 to 9), but I've noticed that in a particular configuration prompts instead for two digits (_ _), this is sure due to the modules loaded, but why ?

The SandMath adds one field to the single-digit prompts, this may be the cause in your system if you have it plugged in. This is mantioned in page #44 of the SandMath Manual.
Find all posts by this user
Quote this message in a reply
05-12-2021, 03:47 PM
Post: #5
RE: FIX_ _ on HP41 (fixed point display)
Thank-you Angel.
I've cheched it, but sure I had noticed it with the ZENROM, 'cause, if I'm not wrong it was not so with the previous SM release.
Aurelio
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)