Post Reply 
Ans before minus problem [Beginner Alert]
03-24-2020, 09:19 AM
Post: #1
Ans before minus problem [Beginner Alert]
Well, decided to buy the hp prime for school and now I've ended up in a problem. Every time I enter a negative number, especially irritating in statistics, "Ans" decides to pop up before the minus sign. Making go back a step to delete 3 letters every time I need to input a negative number. Is there an option to dissable the automatic "ans"?
Find all posts by this user
Quote this message in a reply
03-24-2020, 11:12 AM
Post: #2
RE: Ans before minus problem [Beginner Alert]
Seems you are using the subtraction operand (-) instead of the change sing key (+/-)


11C 12C 15C 17BII 18C 19BII 21 25 27S 28S 32E 32S 32SII 33C 33S 34S 35S 38C 39gs 39GII 40gs 41C 41CV 41CX 42S 45 48G+ 48GII 49G 49G+ 50 67 71B 97
Find all posts by this user
Quote this message in a reply
03-24-2020, 06:36 PM
Post: #3
RE: Ans before minus problem [Beginner Alert]
Oh... I thought that button was for situations like: x= ±√4 => x=2 x= -2
Find all posts by this user
Quote this message in a reply
03-24-2020, 11:22 PM
Post: #4
RE: Ans before minus problem [Beginner Alert]
I suppose the '+/-' key would have been labelled '(-)' if it wasn't for the need to support RPN.

— Ian Abbott
Find all posts by this user
Quote this message in a reply
03-25-2020, 02:33 AM
Post: #5
RE: Ans before minus problem [Beginner Alert]
(03-24-2020 11:22 PM)ijabbott Wrote:  I suppose the '+/-' key would have been labelled '(-)' if it wasn't for the need to support RPN.

Yes '(-)' is what most calculator manufacturers currently use for their sign change key.

HP used 'CHS' (Change Sign) for many years. HP changed the key label to '+/-' in 1990 with the introduction of the HP-48SX and appear to have used that symbol on newer models ever since.

TI used '+/-' for this key for many years until around 1990 when they switched to '(-)' with the introduction of the TI-81 graphing calculator and appear to have used that symbol on newer models ever since.

Early Sharp and Casio models used '+/-' for this key until they also switched to '(-)'.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-25-2020, 10:24 PM
Post: #6
RE: Ans before minus problem [Beginner Alert]
(03-25-2020 02:33 AM)Steve Simpkin Wrote:  HP used 'CHS' (Change Sign) for many years.

On the Friden 132 from the mid 60's, the key was labeled "CHANGE SIGN".
Find all posts by this user
Quote this message in a reply
03-25-2020, 10:55 PM
Post: #7
RE: Ans before minus problem [Beginner Alert]
(03-25-2020 10:24 PM)Wes Loewer Wrote:  
(03-25-2020 02:33 AM)Steve Simpkin Wrote:  HP used 'CHS' (Change Sign) for many years.

On the Friden 132 from the mid 60's, the key was labeled "CHANGE SIGN".

Interesting. On the first (HP9100A) and second (HP9810A) generation HP desktops they labeled it "CHG SIGN".
https://www.hpmuseum.org/9100/9100akm.jpg
https://www.hpmuseum.org/98xx/9810kbds.jpg

On the third generation (HP9815A) HP desktop they changed it to a "+ -" symbol with a pair of curved arrows between them.
https://www.hpmuseum.org/9805_15/9815keyl.jpg

When they came out with the HP-35 hand held, they changed it to "CHS". "CHS" was then used on hand helds and desktop models until the HP-48SX.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)