Post Reply 
DM41X
01-30-2020, 04:50 PM
Post: #101
RE: DM41X
(01-30-2020 02:43 PM)toml_12953 Wrote:  OK folks! Here's a question for all you old* 41 owners: How many ROMS are there anyway? I see reference to many on here but is there a comprehensive list of the ROMs that were/are available? I suspect they number in the hundreds but it would be nice to see a list in one place so I could decide which ones to download to fit my usage of the 41X.

An online catalog of modules based on the 41CL collection can be found here

https://calc.fjk.ch/library/sy41cl-image...fiers.html

You can get the module roms themselves from Monte's site

http://www.systemyde.com/hp41/

(01-30-2020 02:43 PM)toml_12953 Wrote:  * I'm referring to the calculator being old, not YOU! Smile
Probably appropriate in either case Smile

Remember kids, "In a democracy, you get the government you deserve."
Find all posts by this user
Quote this message in a reply
01-30-2020, 06:34 PM (This post was last modified: 01-30-2020 06:38 PM by smp.)
Post: #102
RE: DM41X
(01-30-2020 02:43 PM)toml_12953 Wrote:  OK folks! Here's a question for all you old* 41 owners: How many ROMS are there anyway? I see reference to many on here but is there a comprehensive list of the ROMs that were/are available? I suspect they number in the hundreds but it would be nice to see a list in one place so I could decide which ones to download to fit my usage of the 41X.

* I'm referring to the calculator being old, not YOU! Smile

Look here on the 41CL site:
http://systemyde.com/hp41/manuals.html

Look in the 41CL Calculator Manual. Pages 49-59 list all the ROMs in the 41CL. I've always taken that list as the definitive list. I've not counted them, though.

smp

Oops! Sorry for the duplicate information. I didn't see the post by mfleming because of the page break.
Find all posts by this user
Quote this message in a reply
01-30-2020, 07:13 PM
Post: #103
RE: DM41X
(01-30-2020 06:34 PM)smp Wrote:  Oops! Sorry for the duplicate information. I didn't see the post by mfleming because of the page break.

That's OK, I've done that before too when a previous post didn't show up on my system until after I'd answered. You wouldn't happen to know where the instructions for those ROMs are, would you? I'm particularly intrigued by the one titled BASIC. I'm always on the lookout for BASIC interpreters/compilers for various systems. I don't know if that BASIC ROM is actually a version of BASIC, though, without the manual or QRG for it.

Tom L
Cui bono?
Find all posts by this user
Quote this message in a reply
01-30-2020, 07:53 PM
Post: #104
RE: DM41X
Here's another database of HP-41 modules online:
https://calc.fjk.ch/db/hp41mod.php

(01-30-2020 07:13 PM)toml_12953 Wrote:  ... You wouldn't happen to know where the instructions for those ROMs are, would you? I'm particularly intrigued by the one titled BASIC. I'm always on the lookout for BASIC interpreters/compilers for various systems. I don't know if that BASIC ROM is actually a version of BASIC, though, without the manual or QRG for it.

Sorry, but no. I guess your best bet may be to contact Monte, or Angel, or Sylvain.

smp
Find all posts by this user
Quote this message in a reply
01-30-2020, 08:14 PM
Post: #105
RE: DM41X
(01-30-2020 07:13 PM)toml_12953 Wrote:  You wouldn't happen to know where the instructions for those ROMs are, would you? I'm particularly intrigued by the one titled BASIC. I'm always on the lookout for BASIC interpreters/compilers for various systems. I don't know if that BASIC ROM is actually a version of BASIC, though, without the manual or QRG for it.

Most of the 3rd-party ROMs do not have any documentation; the vast majority come from users that have found or purchased 41's with modules inside, and either donated them to folks that know how (or got procedures on how to do it themselves) and they extracted the ROM images.

Monte has been collecting them to add to the 41CL Flash library and has become somewhat of a clearing house of the latest versions. Note that the 41CL uses modules in the *.rom format, while the 41X uses modules in the *.mod file format. For simple, 4K, 1-bank modules, a .rom file can be easily converted to a .mod file, but for complex, multi-page modules you need to use more sophisticated tools like the excellent MLDL2K tools.

But if you need some of those, ask here first as there's a good chance someone has already built that first.

All that said, TOS and here in these forums are the best places to look for documentation for these 3rd-party modules, but if you still can't find it after looking, I'd suggest creating a new thread specific to that module here in the "Not Quite..."

Also, look at Matthias' amazing 41 ROM Module database: Not all of these are available from public resources, but if you find one you really want to check out, you could post a request here as well:

http://www.hp-collection.org/41database.html

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
01-30-2020, 09:01 PM (This post was last modified: 01-30-2020 09:05 PM by Massimo Gnerucci.)
Post: #106
RE: DM41X
(01-30-2020 02:43 PM)toml_12953 Wrote:  OK folks! Here's a question for all you old* 41 owners: How many ROMS are there anyway? I see reference to many on here but is there a comprehensive list of the ROMs that were/are available? I suspect they number in the hundreds but it would be nice to see a list in one place so I could decide which ones to download to fit my usage of the 41X.

Have a look at Matthias' list.

(01-30-2020 02:43 PM)toml_12953 Wrote:  * I'm referring to the calculator being old, not YOU! :)

If it is old, then we are, too... :(


Sorry, duplicate info. I, too, missed the page break.

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
01-30-2020, 11:18 PM
Post: #107
RE: DM41X
I thought the BASIC rom was the BASIC interpreter from the PPC JOURNAL V11N2P11.
Find all posts by this user
Quote this message in a reply
01-30-2020, 11:33 PM
Post: #108
RE: DM41X
(01-30-2020 11:18 PM)Gene Wrote:  I thought the BASIC rom was the BASIC interpreter from the PPC JOURNAL V11N2P11.

I can hear the journal pages flipping from here... Smile

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
01-31-2020, 08:57 AM (This post was last modified: 01-31-2020 09:12 AM by Ángel Martin.)
Post: #109
RE: DM41X
My notes on the BASIC ROM are sketchy but here's the main content:

"BAS" by Erik Christensen PPCCJ V11N2p10
"BASIC" by Per Liedberg UPLE #11286 (available at TOS, see the UPLE section)
"AFI+" by Erik Christensen PPCCJ V10N5 p10
"FORMULA" by Stefan Fegert HP-41 in der Praxis
"AOS" by Greg McClure GMC ROM
"FIFTH" by D. Cody Kyrobie PPCCJ V11N2p5 - March 1984


Hope this helps,
ÁM
Find all posts by this user
Quote this message in a reply
01-31-2020, 09:08 AM (This post was last modified: 01-31-2020 10:14 AM by Ángel Martin.)
Post: #110
RE: DM41X
(01-30-2020 02:43 PM)toml_12953 Wrote:  OK folks! Here's a question for all you old* 41 owners: How many ROMS are there anyway? I see reference to many on here but is there a comprehensive list of the ROMs that were/are available? I suspect they number in the hundreds but it would be nice to see a list in one place so I could decide which ones to download to fit my usage of the 41X.

The URL below points to a ZIP file with the most recent versions of my modules - plus a few extras:
http://www.swissmicros.com/dm41x/fat/

Generally speaking the MOD files on that zip archive are identical to those found on TOS and other sources (pls. mind the revisions and release dates). I don't remember having to modify them for the DM41X, so they should all be 100% compatible (famous last words...) . Do report incidences if you run into some.

Remarks:

Most of the advanced modules use the LIBRARY #4 ROM. Make sure you always load that one/.

Some have different versions depending on the page# to plug it in.
- If you don't use the printer page#6 is available for the AMC_OS/X and HEPAX_4F to use.
- page #7 is also available (no HP-IL folks), so those two above and the WARP_Core can be safely plugged in it as well.

Enjoy,
ÁM
Find all posts by this user
Quote this message in a reply
01-31-2020, 09:27 AM (This post was last modified: 01-31-2020 09:29 AM by Ángel Martin.)
Post: #111
RE: DM41X
(01-30-2020 06:36 AM)anetzer Wrote:  No one wants to play pinball, I guess, but even on the HP42S a quick graph could be plotted for an equation.

But you *can* play pinball - that is if you consider the classic game in the GAMES ROM to be a decent surrogate ;-)

(01-30-2020 06:36 AM)anetzer Wrote:  I guess someone will eventually start to play around with that big screen...

I don't know enough about the machine so i can be way off but I believe that to pull that off you'd need direct access to the DMCP code. The 41 emulator doesn't know a thing about the LCD used, I'm afraid...

Sure I'd fancy a modern version of PRPLOT on the screen...
Find all posts by this user
Quote this message in a reply
01-31-2020, 06:26 PM
Post: #112
RE: DM41X
Mine has been ordered tuesday evening and has arrived this friday morning. My department in France is close to Switzerland so this explains that.
Serial # = 22.

My site http://www.emmella.fr
Find all posts by this user
Quote this message in a reply
01-31-2020, 07:01 PM
Post: #113
RE: DM41X
(01-31-2020 06:26 PM)badaze Wrote:  Mine has been ordered tuesday evening and has arrived this friday morning. My department in France is close to Switzerland so this explains that.
Lucky you, I have ordered mine 10 days ago and was shipped on the same day, unfortunately I have not yet received it! Sad ... and yes Canada is definitively not close to Switzerland, so it is expected, but still ...
Find all posts by this user
Quote this message in a reply
02-01-2020, 03:58 PM
Post: #114
RE: DM41X
Family photo.

[Image: 41yearsof41.jpg]

41 years of 41.

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
02-01-2020, 04:56 PM
Post: #115
RE: DM41X
Very nice! Make me drool! :lol:

smp
Find all posts by this user
Quote this message in a reply
02-01-2020, 08:52 PM
Post: #116
RE: DM41X
Nice shot!!

The lighting is just right to make the ZenROM overlay look like it's glowing. Smile

Is the BlankNut also a HalfNut?

What about:

A Tall-Keys machine
A DM41L
A 41Y
A 41W
A CL (can't tell, is the upper left machine a CL, label is hard to see)

We could ask Sylvain to show us his 41 family photos, but I understand the MoHPC web-host has requested us to not use bandwidth excessively...

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
02-01-2020, 10:18 PM (This post was last modified: 02-01-2020 10:21 PM by Massimo Gnerucci.)
Post: #117
RE: DM41X
(02-01-2020 08:52 PM)rprosperi Wrote:  Nice shot!!

The lighting is just right to make the ZenROM overlay look like it's glowing. Smile
Thank you Bob, just luck.

(02-01-2020 08:52 PM)rprosperi Wrote:  Is the BlankNut also a HalfNut?
Yes

(02-01-2020 08:52 PM)rprosperi Wrote:  What about:

A Tall-Keys machine
C and CV are TK

(02-01-2020 08:52 PM)rprosperi Wrote:  A DM41L
I'll never get one, I'm afraid.
Well, not really: you know I am not fond of the landscape format in general and I particularly dislike it in the DM41(L), so...

(02-01-2020 08:52 PM)rprosperi Wrote:  A 41Y
A 41W
Never found one, apart a couple of times when I was easily outbidded.
Given how much they have to be nursed to mantain their OS alive, I don't think they are a viable collectable as of today.

(02-01-2020 08:52 PM)rprosperi Wrote:  A CL (can't tell, is the upper left machine a CL, label is hard to see)
Yes, that C is a CL now.

(02-01-2020 08:52 PM)rprosperi Wrote:  We could ask Sylvain to show us his 41 family photos, but I understand the MoHPC web-host has requested us to not use bandwidth excessively...

Smile
This is only an excerpt, but I know that Sylvain's collection will easily dwarf mine, however this was only meant to show how it all evolved in the last 41 years.

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
02-01-2020, 11:40 PM (This post was last modified: 02-01-2020 11:40 PM by rprosperi.)
Post: #118
RE: DM41X
Interesting! The TK CV must be a frankencalc, right? I'm pretty sure production switched from TK to normal before CV production began, right?

Actually I find the DM41L to be much more interesting than I expected. It's soo different from a normal 41, it's like exploring an entirely new machine. It is very interesting. It is not a 41.

I agree the V and W are intriguing, but cost FAR more than I would ever pay. But rare is like that...

Yes, July is coming and I hope the 41X will introduce the 41C to a bunch of new users on its 41st birthday.

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
02-02-2020, 06:26 AM
Post: #119
RE: DM41X
(02-01-2020 11:40 PM)rprosperi Wrote:  Yes, July is coming and I hope the 41X will introduce the 41C to a bunch of new users on its 41st birthday.

The Ephemerides ROM would be an appropriate project ;-)
Find all posts by this user
Quote this message in a reply
02-02-2020, 08:32 AM
Post: #120
RE: DM41X
I'd recommend reading "Calendrical Calculations" by E. M. Reingold & N. Dershowitz. It contains some amazing details but not a lot relevant to modern date/time computations.

Pauli
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)