Post Reply 
HP97 The journey begins
11-08-2019, 09:01 AM
Post: #141
RE: HP97 The journey begins
(10-19-2019 08:31 PM)Harald Wrote:  Wow! Can't wait to get one Smile

Same to me. Tony, you are a genius!

Bernhard

That's one small step for a man - one giant leap for mankind.
Find all posts by this user
Quote this message in a reply
11-08-2019, 10:15 AM
Post: #142
RE: HP97 The journey begins
(11-08-2019 09:01 AM)PANAMATIK Wrote:  Same to me. Tony, you are a genius!

Bernhard

I wish that were the case ;-)

cheers

Tony
Find all posts by this user
Quote this message in a reply
11-09-2019, 11:02 AM
Post: #143
RE: HP97 The journey begins
Nope, definitely not a genius. The difference between a fool and a genius is that that the latter has limits and Tony's doesn't appear to have any Smile
Find all posts by this user
Quote this message in a reply
11-09-2019, 12:40 PM (This post was last modified: 11-09-2019 01:08 PM by teenix.)
Post: #144
RE: HP97 The journey begins
(11-09-2019 11:02 AM)Paul Dale Wrote:  Nope, definitely not a genius. The difference between a fool and a genius is that that the latter has limits and Tony's doesn't appear to have any Smile

As Clint Eastwood said .... :-)

I'd actually put myself on a lesser par with Bernhard and some earlier achievers.

cheers

Tony
Find all posts by this user
Quote this message in a reply
11-14-2019, 11:03 AM (This post was last modified: 11-14-2019 11:04 AM by teenix.)
Post: #145
RE: HP97 The journey begins
Hi all,

Some more progress.

Here is the HP-65 CPU board almost populated with a little test wire hanging in the breeze.

All power supplies work ok, Battery 3.7-4.5V. Volts out are 8V, 6V, 5V and 3.3V.

Most software has been written, bugs are next.

cheers

Tony


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
11-17-2019, 05:13 AM
Post: #146
RE: HP97 The journey begins
Hi all,

Happy today :-)

The classic display drivers have responded nicely to my new single processor interface.

cheers

Tony


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
11-17-2019, 10:43 PM
Post: #147
RE: HP97 The journey begins
(11-17-2019 05:13 AM)teenix Wrote:  Hi all,

Happy today :-)

The classic display drivers have responded nicely to my new single processor interface.

cheers

Tony

Great, looks like your plan has worked! Did you try the decimal points?
Find all posts by this user
Quote this message in a reply
11-17-2019, 10:53 PM
Post: #148
RE: HP97 The journey begins
(11-17-2019 10:43 PM)Harald Wrote:  Great, looks like your plan has worked! Did you try the decimal points?

Yes, all good.

I had the test LED across a cathode driver output and it flashed quite bright at first switch on. After a few hours of playing around I figured out the problem and it doesn't light at all now except for a faint glow which looks like normal operation.

cheers

Tony
Find all posts by this user
Quote this message in a reply
11-18-2019, 04:18 AM (This post was last modified: 11-18-2019 04:18 AM by teenix.)
Post: #149
RE: HP97 The journey begins
Hi all,

Quite a bit to go with CPU board but looking good so far:-)

cheers

Tony


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
11-18-2019, 07:12 AM
Post: #150
RE: HP97 The journey begins
WOW, Just wow !!!
Congratulations !!!

Edoardo & Alberto
Find all posts by this user
Quote this message in a reply
11-19-2019, 04:28 AM
Post: #151
RE: HP97 The journey begins
Hi all,

The HP65 CPU board seems to be running ok.

The display, keyboard and PRGM/RUN switch are working and it will accept and run programs. The PC program connects to it and transfers information back and forth. The calculator menu is working and I can use it to load and save program cards plus set operating options from the keyboard.

Next is the CRC stuff for the card reader.

cheers

Tony
Find all posts by this user
Quote this message in a reply
11-19-2019, 01:09 PM
Post: #152
RE: HP97 The journey begins
(11-19-2019 04:28 AM)teenix Wrote:  Hi all,

The HP65 CPU board seems to be running ok.

The display, keyboard and PRGM/RUN switch are working and it will accept and run programs. The PC program connects to it and transfers information back and forth. The calculator menu is working and I can use it to load and save program cards plus set operating options from the keyboard.

Next is the CRC stuff for the card reader.

cheers

Tony

Great! You are making good progress! I'll dig out a 65 and prepare for a board Smile
Find all posts by this user
Quote this message in a reply
11-19-2019, 01:56 PM
Post: #153
RE: HP97 The journey begins
Hi Tony,

both the HP-65 and HP-67 replacement boards are spectacular,
are these available for sale ?

take care Alberto

Edoardo & Alberto
Find all posts by this user
Quote this message in a reply
11-19-2019, 02:12 PM
Post: #154
RE: HP97 The journey begins
(11-19-2019 01:09 PM)Harald Wrote:  Great! You are making good progress! I'll dig out a 65 and prepare for a board Smile

Hopefully not too long :-)

cheers

Tony
Find all posts by this user
Quote this message in a reply
11-19-2019, 02:24 PM
Post: #155
RE: HP97 The journey begins
(11-19-2019 01:56 PM)albertofenini Wrote:  Hi Tony,

both the HP-65 and HP-67 replacement boards are spectacular,
are these available for sale ?

take care Alberto

Hi Alberto,

Will be, but a bit to go yet. The 67 appears to work ok but a bug exists in the card read that I haven't sorted yet. If you consider the complexity of PIC machine code emulating HP microcode and the CRC chip while trying to capture data as the card whizzes through the reader... :-)

Anyway, maybe I'm looking at the problem but can't see it so I put it aside for a bit and I'll have a go at the 65 for awhile.

cheers

Tony
Find all posts by this user
Quote this message in a reply
11-20-2019, 08:22 PM
Post: #156
RE: HP97 The journey begins
Hi all,

Well it looks like the HP65 CPU board is behaving.

All functions work and it now reads and writes cards :-)

It also detects write protected cards which stops the write process and flags an error, but you can override this with a menu option and re-program those cards if required.

Just to test the Bluetooth now and it should be good.

cheers

Tony
Find all posts by this user
Quote this message in a reply
11-20-2019, 09:27 PM
Post: #157
RE: HP97 The journey begins
Very good !!!
Congratulations for the excellent result !!!

Edoardo & Alberto
Find all posts by this user
Quote this message in a reply
11-20-2019, 09:30 PM
Post: #158
RE: HP97 The journey begins
Very well done!
Thank you Tony,

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
11-20-2019, 11:02 PM
Post: #159
RE: HP97 The journey begins
That's an amazingly good result after the pain the 67 caused...


Pauli
Find all posts by this user
Quote this message in a reply
11-20-2019, 11:06 PM
Post: #160
RE: HP97 The journey begins
(11-20-2019 11:02 PM)Paul Dale Wrote:  That's an amazingly good result after the pain the 67 caused...

Pauli

Yes, I thought the 67 would be easier, but not the case. Now that the 65 is ticking over, I'll get back to find that (hopefully last) elusive bug.

cheers

Tony
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)