Post Reply 
Early Prime G2
12-17-2018, 09:06 AM
Post: #1
Early Prime G2
Hello,

As I was doing some cleanup in my files, I found this one that I wanted to share with you...

This is a picture of the first running graphical program on the Prime G2 prototype HW (we did not yet have the "real" screen at the time)...

   

Cyrille

Although I work for the HP calculator group, the views and opinions I post here are my own. I do not speak for HP.
Find all posts by this user
Quote this message in a reply
12-17-2018, 11:34 AM
Post: #2
RE: Early Prime G2
Hello Cyrille,

Thanks ! Nice picture

— Dirk Hartland
Find all posts by this user
Quote this message in a reply
12-17-2018, 11:42 AM
Post: #3
RE: Early Prime G2
Progress! Clearly, the problem has been reduced!
Find all posts by this user
Quote this message in a reply
12-17-2018, 01:47 PM (This post was last modified: 12-17-2018 01:57 PM by compsystems.)
Post: #4
RE: Early Prime G2
The following hpPrimeX (professional level no longer pre-university) must have ports and a screen like the one shown in the image. =)

LO SUFICIENTEMENTE BUENO ES ENEMIGO DE LA EXCELENCIA.
Find all posts by this user
Quote this message in a reply
12-18-2018, 06:19 AM
Post: #5
RE: Early Prime G2
Hello,

Quote:The following hpPrimeX (professional level no longer pre-university) must have ports and a screen like the one shown in the image. =)

Be carefull what you wish for! The device you see above is now non functional because I made a big mistake. I touched it... And ESD zapped it!
Ports are an ESD nightmare :-)

Cyrille

Although I work for the HP calculator group, the views and opinions I post here are my own. I do not speak for HP.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)