Post Reply 
HP 41CV key problem
01-16-2018, 09:59 AM
Post: #2
RE: HP 41CV key problem
Hi Trond,
. Dunno if this will work for you or not, but, you might try making sure the screws residing under the bottom two rubber feet are nice and tight. If they aren't, that can sometimes cause issues.

. On mine, the power button acted a little flakey, not registering all the time. Turns out that while the screw under the foot nearest the power button seemed to be quite snug, it actually needed to be tightened down more. I popped the foot pad off and cranked down on the screw to make sure it was good and tight, ( but not overly so, you don't want to strip the head or crack the case ). Ever since then it's worked perfectly.

. That's what worked for my scenario, so you might give that a try. Hopefully some others will chime in with some other possible scenarios and fixes. Smile
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 41CV key problem - Trond - 01-11-2018, 05:32 AM
RE: HP 41CV key problem - BarryT - 01-16-2018 09:59 AM
RE: HP 41CV key problem - g8241CV - 01-22-2018, 06:00 AM



User(s) browsing this thread: 1 Guest(s)