HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP 15C and INT(1/√(1-x),0,1)

Post Reply 
HP 15C and INT(1/√(1-x),0,1)
01-10-2018, 01:43 PM
Post: #23
salvomic Offline
Senior Member
 		Posts: 1,396
Joined: Jan 2015
RE: HP 15C and INT(1/√(1-x),0,1)
(01-09-2018 06:59 PM)Dieter Wrote:  OK, but at which program line did this error occur and for which x-value (take a look at the other stack registers)?
Dieter

Definitely I must take again the experiment, timing and then control the line. I'll do it asap.

(01-10-2018 01:33 PM)emece67 Wrote:  Tested on a wp34s (with the last version of the integration routine):
    ...
  • SCI10: 1.999999985077354 (3 s)
  • ALL0: 1.999999985077354 (4 s)
  • DBLON: 1.999999999999999976156369124294215 (16 s)

Regards.

so, are you saying I should also buy a WP34? Smile
Yes, I should do it (I need some other many to spend in collection...)

Salvo
∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 15C and INT(1/√(1-x),0,1) - salvomic - 11-26-2017, 07:51 PM
RE: HP 15C and INT(1/√(1-x),0,1) - JimP - 01-12-2018, 04:18 AM
RE: HP 15C and INT(1/√(1-x),0,1) - tgray - 01-09-2018, 03:42 PM
RE: HP 15C and INT(1/√(1-x),0,1) - salvomic - 01-10-2018 01:43 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication