Post Reply 
USB on my WP34S
10-24-2017, 06:25 AM (This post was last modified: 10-24-2017 01:32 PM by Sadsilence.)
Post: #6
RE: USB on my WP34S
It is one of WP34S USB Boards' benefits, that you can easily update calculator firmware (=flash it) without need to (re)open calculator after installation of this addon board. Just connect calculator with a micro USB cable to your computer and follow instructions in manual.

Of course it is your choice. You are not forced to, when you are only interested in data transfer between WP34S emulator on PC side and your WP34S hardware. Depending on your previously installed firmware and hardware (IR-diode, oscillator) you cannot use additional real time clock, stopwatch and printing features.

When you reside in the US and need additional help beyond simple USB board delivery you may contact forum member Jim Horn, too. As far as I know he even installs those USB boards into calculators and of course can reflash them.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
USB on my WP34S - scrubbed - 10-19-2017, 08:28 PM
RE: USB on my WP34S - BarryMead - 10-20-2017, 03:14 AM
RE: USB on my WP34S - Sadsilence - 10-20-2017, 06:32 AM
RE: USB on my WP34S - Nigel (UK) - 10-20-2017, 08:21 AM
RE: USB on my WP34S - scrubbed - 10-23-2017, 08:01 PM
RE: USB on my WP34S - Sadsilence - 10-24-2017 06:25 AM
RE: USB on my WP34S - rprosperi - 10-24-2017, 12:37 PM
RE: USB on my WP34S - Sadsilence - 10-24-2017, 01:22 PM
RE: USB on my WP34S - scrubbed - 11-13-2017, 08:41 PM



User(s) browsing this thread: 1 Guest(s)