Post Reply 
Recommanded NiMh battery cells for HP82162A
09-27-2017, 10:49 PM
Post: #58
RE: Recommanded NiMh battery cells for HP82162A
(09-27-2017 09:59 PM)rprosperi Wrote:  
(09-27-2017 09:50 PM)Dieter Wrote:  The four contacts in the calculator as well as the four springs in the battery holder are the same for each of the four batteries. So if these work fine for the flat minus end they should also be fine for a flat end at the plus side. ;-)

I assume Joe was referring to the fact that the flat-top cells are shorter, yet the springs are still strong enough to maintain contact, but I'll let him confirm for sure.

Correct.

(09-27-2017 09:59 PM)rprosperi Wrote:  Joe - note that with flat-top cells, you should 'stretch' the springs in the holder a bit to ensure they're tight, else when the machine gets bumped or horror-of-horrors, dropped, you may lose momentary contact. This rarely will lead to mem lost for the 41's RAM, but it can cause the clock to reset - this is exactly what happened to me, and took a while to figure out.

Good suggestion!

<0|ΙΈ|0>
-Joe-
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Recommanded NiMh battery cells for HP82162A - Joe Horn - 09-27-2017 10:49 PM



User(s) browsing this thread: 3 Guest(s)