Post Reply 
HP-82183A... Problem with ASTEC 0950-0408 :(
06-29-2017, 08:18 PM
Post: #11
RE: HP-82183A... Problem with ASTEC 0950-0408 :(
(06-29-2017 05:25 PM)Titi Wrote:  Thank you Paul. May be I'm interest ?!
Send me an email with your address and I can tell you how much it will cost to send it to you.

(06-29-2017 05:25 PM)Titi Wrote:  My first control from the Service Manual (I make a PDF).

So, about the 2nd step, there is no CR8 element on my motherboard (and no CR7 too) ?!
The one I am looking at does not have those components either it does not even have pads for CR7. One thing I would check would be the reference voltage at pin 7 of U3, if it is wrong the output from the +5V logic supply will be wrong. The theory section starting on page 2-4 explains in some detail how this 5V regulator works.

(06-29-2017 05:25 PM)Titi Wrote:  Thierry

Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: HP-82183A... Problem with ASTEC 0950-0408 :( - Paul Berger (Canada) - 06-29-2017 08:18 PM

User(s) browsing this thread: 1 Guest(s)