Post Reply 
Cleaning an SR-50 battery compartment
04-22-2017, 01:23 PM
Post: #5
RE: Cleaning an SR-50 battery compartment
(04-22-2017 04:00 AM)Matt Agajanian Wrote:  Bob, I'm using a graphics program on my iPad to resize the pic so its physical size and memory size are less than 200KB. Or, can I provide a link to my Dropbox locale of the full-size pic in my next post?


I'm going to try posting the URL to the full picture.

The link works fine and this photo is much better, thanks for updating.

It appears the tabs that contact the battery pack are intact and there does not appear to be too much residue, so it's likely this can be easily cleaned up and be OK. It also appears that there has not been any spill into the machine's innards, but one cannot always see this from the outside. Be careful when cleaning of the wires that appear to connect to the tabs on the left in the photo

I should note that I don't have an SR-50 or other TI with this style battery bay, so I could be wrong - maybe others that have this machine could comment and share cleaning suggestions.

Good luck with cleaning and battery repairs, hope to see the red glow of the LED soon.

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: Cleaning an SR-50 battery compartment - rprosperi - 04-22-2017 01:23 PM

User(s) browsing this thread: 1 Guest(s)