Should I bother? HP-34C in rough shape
|
04-26-2017, 07:42 PM
(This post was last modified: 04-26-2017 08:24 PM by AndiGer.)
Post: #33
|
|||
|
|||
RE: Should I bother? HP-34C in rough shape
Yes, right, the 10 connections on the board.
And as I can see: the inner strip is corroded. The one leading to the 3rd connection on the board. You can bridge it with an additional lead. Look where it is leading to and solder where you already have original solder joints. Soldering the lead at the battery side is not so simple because soldering to the battery contact will not connect very well, but is possible. Look at this http://keesvandersanden.nl/calculators/hp33c_inside.php and this (last picture how Kees did it) http://keesvandersanden.nl/calculators/h...pair_1.php Andi BTW: I am mathematician, have no deeper electronic knowledge |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)