Post Reply 
(71B) HP 3421A DATA AQUISTION/CONTROL UNIT calibration
03-31-2017, 09:19 PM
Post: #8
RE: (71B) HP 3421A DATA AQUISTION/CONTROL UNIT calibration
(03-31-2017 02:12 AM)Dave Frederickson Wrote:  Hi Erwin,

The B parameter in line 170 should be 0.0002360998857.

Regards, Dave

Hi Dave, thanks
I'm on a project outside my home so I'm not able to finish my work on the calibration program for a longer time. Thanks for the hint to the faulty numbers. I did a rewrite of the program - but still not finished - with additional measurement tasks. The performance verification is ready but not tested also the counter check.
Not ready is the calibration for DC, AC and Ohms ... I did this all without my HP 4321A.

The program at the moment consists of the two parts: performance and calibration of the main unit and performance and calibration of the MUX board.

If it would help I can PM you the actual version of the program. Maybe we could finish the program as a 'combination' project if you want.

best regards
Erwin
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: (71B) HP 3421A DATA AQUISTION/CONTROL UNIT calibration - Erwin - 03-31-2017 09:19 PM



User(s) browsing this thread: 1 Guest(s)