Post Reply 
HP 32S Repair
09-23-2016, 11:47 PM (This post was last modified: 09-23-2016 11:49 PM by jhg.)
Post: #23
RE: HP 32S Repair
Final Result:

I used two #3 x 1/4 brass wood screws in two of the top posts. (I found a selection of miniature screws ranging down to #0 at the local Ace Hardware) The flat head's diameter is about .005" larger than the hole in the casing, so it perfectly fits and pulls the two halves together without having to split the post or do anything else, and does not interfere with the battery cover.

All around a perfect result, thanks to the help from this forum. It is greatly appreciated.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 32S Repair - jhg - 09-10-2016, 05:48 PM
RE: HP 32S Repair - Nick - 09-10-2016, 08:10 PM
RE: HP 32S Repair - Ed Wright - 09-11-2016, 12:28 AM
RE: HP 32S Repair - Marcio - 09-12-2016, 04:57 PM
RE: HP 32S Repair - gaster - 09-13-2016, 02:54 AM
RE: HP 32S Repair - Nick - 09-11-2016, 05:32 AM
RE: HP 32S Repair - jhg - 09-11-2016, 05:37 AM
RE: HP 32S Repair - BartDB - 09-12-2016, 03:04 PM
RE: HP 32S Repair - jhg - 09-12-2016, 04:29 PM
RE: HP 32S Repair - aj04062 - 09-13-2016, 12:45 AM
RE: HP 32S Repair - jhg - 09-17-2016, 08:58 PM
RE: HP 32S Repair - mfleming - 09-18-2016, 01:46 AM
RE: HP 32S Repair - jhg - 09-19-2016, 06:11 PM
RE: HP 32S Repair - Logan - 09-19-2016, 11:20 AM
RE: HP 32S Repair - BartDB - 09-19-2016, 12:13 PM
RE: HP 32S Repair - Logan - 09-19-2016, 06:58 PM
RE: HP 32S Repair - mfleming - 09-19-2016, 07:19 PM
RE: HP 32S Repair - jhg - 09-19-2016, 09:17 PM
RE: HP 32S Repair - mfleming - 09-20-2016, 02:52 AM
RE: HP 32S Repair - PANAMATIK - 09-19-2016, 09:15 PM
RE: HP 32S Repair - Geoff Quickfall - 09-20-2016, 07:15 PM
RE: HP 32S Repair - Logan - 09-20-2016, 09:27 PM
RE: HP 32S Repair - jhg - 09-23-2016 11:47 PM
RE: HP 32S Repair - mfleming - 09-24-2016, 02:49 AM



User(s) browsing this thread: 1 Guest(s)